APL CALEX, APL Datasheet - Page 4

• Manufacturer Part Number: APL
• Description: AIR PURGE COLLAR
• Manufacturer: CALEX

Specifications of APL

• Accessory Type: Air Purge Collar
• Rohs Compliant: Yes
• For Use With: PYROUSB Series Temperature Sensors

all pyrobus series sensors are supplied with a stainless steel mounting nut and are easy to install.
standard sensors will operate in ambient temperatures up to 70°c. For more hostile environments or difficult mounting
conditions a wide range of accessories is available.
accessories
issue c - july 10
specifications subject to change without notice
Calex Electronics Limited
po box 2, Leighton buzzard, bedfordshire, england Lu7 4aZ
tel: [phone]/853800 Fax: [phone] Lo-call tel: [phone]
e-mail: [e-mail]
Fixed mounting bracket
the L-shaped fixed mounting bracket offers a rigid support for the sensor and
allows fine adjustment in a single plane.
adjustabLe mounting bracket
the adjustable mounting bracket consists of a fixed mounting bracket plus
another L-shaped bracket. When assembled as shown the adjustable mounting
bracket offers a rigid support for the sensor and allows fine adjustment in two
planes.
air purge coLLar
the air purge collar is used to keep dust, fumes, moisture and other
contaminants away from the lens. air flows into the fitting on the side and out of
the aperture at the front.
air/Water cooLed housing
the air/water cooled housing allows the sensor to withstand ambient
temperatures which exceed the normal 70°c limit. air or water (depending on the
degree of cooling required) flows into one of the fittings on the side and out of the
other. to prevent condensation forming on the lens, the air/water cooled housing
is supplied complete with an air purge collar. please note, the air/water cooled
housing must be ordered with the sensor and cannot be fitted by the user.
Laser sighting tooL
the Laser sighting tool screws onto the front of the sensor during installation
and indicates precisely where the sensor is aiming. once the sensor has been
aimed at the centre of the target and locked in position the Laser sighting tool
can be removed. the laser is activated by means of a push button on the front
of the tool which has a latching mechanism.
online: http://www.calex.co.uk