86561-4 TE Connectivity, 86561-4 Datasheet - Page 5

• Manufacturer Part Number: 86561-4
• Description: CONTACT, PIN, 26-22AWG, CRIMP
• Manufacturer: TE Connectivity

Specifications of 86561-4

• Connector Type: Contact, Crimp
• Contact Plating: Gold
• Contact Material: Phosphor Bronze
• Contact Termination: Crimp
• Peak Reflow Compatible (260 C): Yes
• Rohs Compliant: Yes
• Contact Gender: Pin
• Product Type: Contact
• Termination Method To Wire/cable: IDC
• Wire/cable Type: Round Wire, Discrete
• Wire Insulation Diameter (mm [in]): 1.02 – 1.42 [0.040 – 0.056]
• Solder Tail Contact Plating: Gold Flash
• Wire Range (mm [awg]): 0.12-0.40² [26-22]
• Centerline (mm [in]): 2.54 [0.100]
• Contact Type: Pin
• Contact Plating, Mating Area, Material: Gold (30)
• Underplate Material: Nickel
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Loose Piece
• For Use With: .100 Centerline Connectors

assurance shall coordinate requalification testing, consisting of all or part of original testing sequence as
determ ined by developm ent/product, quality and reliability engineering.
4.3.
Acceptance is based on verification that product m eets requirem ents of Figure 1. Failures attributed to
equipm ent, test setup or operator deficiencies shall not disqualify product. W hen product failure occurs,
corrective action shall be taken and sam ples resubm itted for qualification. Testing to confirm corrective action is
required before resubm ittal.
4.4.
Applicable AMP quality inspection plan will specify sam pling acceptable quality level to be used. Dim ensional
and functional requirem ents shall be in accordance with applicable product drawing and this specification.
Rev L
Acceptance
Quality Conform ance Inspection
(Connector to AMPMODU connector assem bly)
Term ination Resistance Measurem ent Points
Figure 3
108-9024
5 of 7