747547-9 TE Connectivity, 747547-9 Datasheet - Page 2

• Manufacturer Part Number: 747547-9
• Description: D SUB CONNECTOR, STANDARD, 25POS, PLUG
• Manufacturer: TE Connectivity
• Series: AMPLIMITE HDE-20r

Specifications of 747547-9

• Connector Type: High Density D Sub
• No. Of Contacts: 25
• D Sub Shell Size: DB
• Connector Body Material: Metal
• Gender: Plug
• Contact Termination: IDC / IDT
• Rohs Compliant: Yes
• Product Type: Connector
• Product Series: HDE-20 (IDC)
• Wire/cable Type: Discrete Wire, Round Jacketed Cable
• Termination Method To Wire/cable: Insulation Displacement Crimp (IDC)
• Wire Insulation Diameter (mm [in]): 1.52 [0.060]
• Mating Connector Lock: With
• Mating Connector Lock Type: Mounting Holes
• Shell Size: 3
• Shell Type: Front Metal Shell
• Grounding Indents: With
• Insulation Support: Yes
• Grade: Standard
• Color: Black
• Shell Material: Steel
• Shield Material: Steel
• Shielded: Yes
• Solder Tail Contact Plating: Tin over Nickel
• Number Of Positions: 25
• Wire Range (mm² [awg]): 0.15 - 0.40 [26-22]
• Pre-assembled: No
• Cable Insulation Diameter (mm [in]): 4.19 – 11.56 [0.165 – 0.455]
• Shell Plating: Tin
• Shield Plating: Tin
• Insert Material: Thermoplastic
• Insert Flammability Rating: UL 94V-0
• Cable Diameter (max.) (mm [in]): 11.56 [0.455]
• Preloaded: Yes
• Contact Type: Pin
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Size: 20
• Enclosure: With
• Connector Style: Plug
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Bulk

3.4.
3.5.
Examination of Product
Termination Resistance,
Dry Circuit
Dielectric Withstanding Voltage
Insulation Resistance
Temperature Rise
vs Current
Vibration, Random
Physical Shock
Mating Force
Unmating Force
Rev C
Performance and Test Description
The product is designed to meet the electrical, mechanical and environmental performance
requirements specified in Figure 1. All tests are performed at ambient temperature unless otherwise
specified.
Test Requirements and Procedures Summary
Test Description
Meets requirements of product
drawing and Application
Specifications 114-40002 and
114-40003.
30 milliohms maximum.
1 kvac dielectric withstanding voltage,
one minute hold. 1 milliampere
maximum leakage current.
5000 megohms minimum initial. 500
megohms final
Maximum temperature rise at
specified current, 30° C. At a max.
ambient temp. of 70° C
No discontinuities greater than 1
microsecond. See note (a).
No discontinuities greater than 1
microsecond. See note (a).
Pounds maximum
As above.
Size
1
2
3
4
Figure 1 (continued)
Positions
Number
MECHANICAL
ELECTRICAL
Requirement
15
25
37
of
9
Plastics
11.6
2.8
4.7
7.8
All
Metal
Shell
30
33
37
40
Visual, dimensional and functional
per applicable quality inspection
plan.
Subject mated contacts
assembled in housing to 50 mv
open circuit at 100 ma maximum,
see Figure 4; Test Specification
109-6-1.
Test between adjacent contacts of
unmated connector assemblies;
Test Specification109-29-1.
Test between adjacent contacts of
unmated connector assembly;
Test Specification 109-28-1.
Measure temperature rise vs
current;
Test Specification 109-45-1.
Subject mated connectors to 20
G's rms with 100 ma current
applied 20 minutes each axis, see
Figure 3;
Test Specification 109-21-5, test
level F.
Subject mated connector to 50
G's half-sine shock pulses of 11
millisecond duration; 3 shocks in
each direction applied along the 3
mutually perpendicular planes
total 18 shocks, see Figure 3;
Test Specification 109-26-1.
Measure force necessary to mate
connector assembly incorporating
free floating fixtures at a rate of
1.0 inch/minute; Test
Specification 109-42, cond A.
Measure force necessary to
unmate connector assembly at a
rate of 1.0 inch/minute; Test
Specification 109-42, cond A.
Procedure
108-40011
2 of 7