281838-3 TE Connectivity, 281838-3 Datasheet - Page 22

• Manufacturer Part Number: 281838-3
• Description: WIRE-BOARD CONN RECEPTACLE, 3POS, 2.54MM
• Manufacturer: TE Connectivity
• Series: HE14r

Specifications of 281838-3

• Connector Type: Wire To Board
• Contact Termination: Crimp
• Gender: Receptacle
• No. Of Contacts: 3
• No. Of Rows: 1
• Pitch Spacing: 2.54mm
• Length/height, External: 15mm
• Rohs Compliant: Yes
• Product Type: Connector
• Termination Method To Wire/cable: Crimp, Insulation Displacement Crimp (IDC)
• Mating Connector Lock: Without
• Connector Series: HE13 / HE14
• Keyed: No
• Centerline (mm [in]): 2.54 [0.100]
• Row-to-row Spacing (mm [in]): 2.54 [0.100]
• Number Of Positions: 3
• Number Of Rows: 1
• Contact Type: Socket
• Connector Style: Receptacle
• Mating Alignment: Without
• Housing Color: Blue
• Ul Flammability Rating: UL 94V-0
• Housing Material: PBT - GF
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Loose Piece

Tyco Electronics France SAS, B.P. 30039 95301 CERGY-PONTOISE Cedex Tél. [phone] Fax [phone]
This document, managed by Tyco Electronics France, is archived in the Startec database.
A printout cannot be considered as a controlled document.
1. SCOPE
This document provides the instructions for the termination of IDC plugs, 90° wire exit, HE13- HE14 series, meeting the
requirements of international standard IEC 603-8.
2. TERMINATION
Every family of connectors is dedicated to a single wire gauge (see list on the last page of this document).
The accepted range varies from 0.08 mm
Other usages are not recommended and should be evaluated on a case by case basis.
2.2. Application tooling
The termination can be acccomplished by hand-tools or more productive application tooling. It can be done conductor
by conductor or simultaneously.
3. TERMINOLOGY
4. WIRING TYPES
The connectors can be placed at the end of the lead or in a daisy chain configuration (see figure 2) .
Care should be taken not to stress the connector when the wires are cut.
2.1. The connectors above are to be terminated to discrete wires type KY 30 (7 strands-PVC jacket) per French
standard NF C 93-521 or ribbon cable with a 2.54 mm of the same characteristics.
Drawing by : A. CAMEL
IDC PLUGS 90° HE13-HE14 SERIES-IEC 603-8
Date : April 1987
2
-AWG 28 (KY 30-02) to 0.22 mm
locking lances
Figure 1
Figure 2
Approved by : Y. PETRONIN
2
- AWG24 (KY 30-04).
wire
housing
contact
Application specification
114-15030
Date : April 1987
21 June 07 Rev. B
1 to 2