1274568-3 TE Connectivity, 1274568-3 Datasheet - Page 3

• Manufacturer Part Number: 1274568-3
• Description: RF/COAXIAL, BNC PLUG, STR, 75OHM, CRIMP
• Manufacturer: TE Connectivity

Specifications of 1274568-3

• Connector Type: BNC Coaxial
• Body Style: Straight Plug
• Coaxial Termination: Crimp
• Impedance: 75ohm
• Rg Cable Type: RG-179
• Contact Material: Phosphor Bronze
• Contact Plating: Gold
• Rohs Compliant: Yes
• Product Type: Connector Kit
• Gender: Bulkhead Jack
• Stacked: No
• Crimp Type: Hex
• Grade: Commercial
• Body Material: Brass
• Sealed: No
• Isolated: No
• Dielectric Material: PTFE
• Number Of Ports: 1
• Panel Mount Retention: With
• Panel Mount Retention Type: Bulkhead
• Panel Attachment Style: Rear Mount
• Connector Impedance (?): 75
• Insulation Resistance (m?): 1,000
• Frequency: DC - 2 GHz
• Coaxial Cable Termination Type: Crimp
• Hardware Included: Yes
• Body Plating: Nickel
• Polarized: No
• Center Contact Material: Phosphor Bronze
• Center Contact Plating: Gold
• Connector Style: Jack
• Coaxial Cable Type (rg/u Or Mfg.): 179
• Government/industry Qualification: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Coaxial Cable
• For Use With: Mini BNC Connector

Rev C
W ithstanding voltage.
Vibration, random .
Mechanical shock.
Durability.
Mating force.
Unm ating force.
Term ination tensile strength.
Therm al shock.
Hum idity, steady state.
Tem perature life.
Test Description
1 m inute hold with no breakdown or
flashover.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
See Note.
31 N [7 lbf] m axim um .
4 N [1 lbf] m inim um .
89 N [20 lbf].
See Note.
See Note.
See Note.
Figure 1 (continued)
ENVIRONMENTAL
MECHANICAL
Requirem ent
EIA-364-13.
EIA-364-20, Condition I.
1000 volts AC at sea level.
Test between adjacent contacts of
unm ated specim ens.
EIA-364-28, Test Condition VII,
Condition D.
Subject m ated specim ens to 3.10
G's rm s between 20-500 Hz. 15
m inutes in each of 3 m utually
perpendicular planes.
EIA-364-27, Method H.
Subject m ated specim ens to 30 G's
half-sine shock pulses of 11
m illiseconds duration. 3 shocks in
each direction applied along 3
m utually perpendicular planes, 18
total shocks.
EIA-364-9.
Mate and unm ate specim ens for
500 cycles at a m axim um rate of
600 cycles per hour.
Measure force necessary to
engage coupling m echanism at a
m axim um rate of 12.7 m m [.5 in]
per m inute.
EIA-364-13.
Measure force necessary to
disengage coupling m echanism at
a m axim um rate of 12.7 m m [.5 in]
per m inute.
EIA-364-8.
Apply specified load at a rate of 25
± 6 m m [.984 ± .24 in] per m inute.
EIA-364-32.
Subject unm ated specim ens to 5
cycles between -40 and 85°C.
EIA-364-31, Method II, Condition C.
Subject unm ated specim ens to
40°C and 90 to 95% RH for 504
hours.
EIA-364-17, Method A, Test
Condition 3, Test Tim e Condition D.
Subject m ated specim ens to 85°C
for 1000 hours.
Procedure
108-2159
3 of 5