MTFDDAA128MAG-1G1 Micron Technology Inc, MTFDDAA128MAG-1G1 Datasheet - Page 23

• Manufacturer Part Number: MTFDDAA128MAG-1G1
• Manufacturer: Micron Technology Inc
• Type: Solid State Driver

Specifications of MTFDDAA128MAG-1G1

• Density: 128GByte
• Operating Supply Voltage (typ): 3.3V
• Operating Temperature (min): 0C
• Operating Temperature (max): 70C
• Package Type: Not Required
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 3.14V
• Operating Supply Voltage (max): 3.46V
• Programmable: Yes
• Lead Free Status / Rohs Status: Compliant

Reliability
Mean Time Between Failures
Endurance
PDF: 09005aef83e18422
realssd_c300_1_8.pdf - Rev. C 10/10 EN
Notes:
Note:
Micron’s SSDs incorporate advanced technology for defect and error management.
They use various combinations of hardware-based error correction algorithms and firm-
ware-based static and dynamic wear-leveling algorithms.
Over the life of the SSD, uncorrectable errors may occur. An uncorrectable error is de-
fined as data that is reported as successfully programmed to the SSD but when it is read
out of the SSD, the data differs from what was programmed.
Table 8: Uncorrectable Bit Error Rate
Mean time between failures (MTBFs) for the SSD can be predicted based on the compo-
nent reliability data using the methods referenced in the Telcordia SR-332 reliability
prediction procedures for electronic equipment.
Table 9: MTBFs
Endurance for the SSD can be predicted based on the usage conditons applied to the
device, the internal NAND component cycles, the write amplification factor, and the wear-
leveling efficency of the drive. The table below shows the drive lifetime for each SSD
density based on predefined usage conditions.
Table 10: Drive Lifetime
Uncorrectable Bit Error Rate
<1 sector per 10
Density
64GB
128GB
256GB
Density
64GB
128GB
256GB
1. The product achieves a mean time between failure (MTBF) of 1.2 million hours, based
1. Total bytes written calculated with the drive 90% full.
2. Access patterns are 50% sequential and 50% random and consist of the following: 5%
3. GB/day can be calculated by dividing the total bytes written value by (365 × number of
on population statistics not relevant to individual units.
are 4k; 5% are 8k; 10% are 16k; 10% are 32k; 35% are 64K; and 35% are 128k.
years). For example: 72TB/5 years/365 days = 40 GB/day for 5 years.
15
bits read
23
Drive Lifetime (Total Bytes Written)
Micron Technology, Inc. reserves the right to change products or specifications without notice.
MTBF (Operating Hours)
C300 1.8-Inch NAND Flash SSD
1.2 million
1.2 million
1.2 million
72TB
72TB
72TB
© 2009 Micron Technology, Inc. All rights reserved.
1
Operation
READ
Reliability