MT45W4MW16BCGB-7013 WT Micron Technology Inc, MT45W4MW16BCGB-7013 WT Datasheet - Page 10
![](/photos/31/34/313423/557-54-vfbga_sml.jpg)
MT45W4MW16BCGB-7013 WT
Manufacturer Part Number
MT45W4MW16BCGB-7013 WT
Description
Manufacturer
Micron Technology Inc
Datasheet
1.MT45W4MW16BCGB-7013_WT.pdf
(69 pages)
Specifications of MT45W4MW16BCGB-7013 WT
Operating Temperature (max)
85C
Mounting
Surface Mount
Operating Temperature Classification
Commercial
Lead Free Status / Rohs Status
Compliant
Part-Numbering Information
Figure 3:
Valid Part Number Combinations
Device Marking
PDF: 09005aef8247bd51/Source: 09005aef8247bd83
64mb_burst_cr1_5_p25z_133mhz__2.fm - Rev. F 9/07 EN
Micron Technology
Product Family
45 = PSRAM/CellularRAM memory
Operating Core Voltage
W = 1.7–1.95V
Address Locations
M = Megabits
Operating Voltage
W = 1.7–3.3V
Bus Configuration
16 = x16
READ/WRITE Operation Mode
BC = Asynchronous/page/burst
Part Number Chart
1
Micron CellularRAM devices are available in several different configurations and densi-
ties (see Figure 3).
After building the part number from the part numbering chart above, visit the Micron
Web site at
the part number is offered and valid. If the device required is not on this list, contact the
factory.
Due to the size of the package, the Micron standard part number is not printed on the
top of the device. Instead, an abbreviated device mark consisting of a five-digit alphanu-
meric code is used. The abbreviated device marks are cross-referenced to the Micron
part numbers at www.micron.com/support/decoder. To view the location of the abbre-
viated mark on the device, refer to customer service note CSN-11, “Product Mark/
Label,” at www.micron.com/support/designsupport/documents/csn.
MT 45 W 4M W 16
64Mb: 4 Meg x 16 Async/Page/Burst CellularRAM 1.5 Memory
Package Codes
GB = 54-ball VFBGA “green” (6 x 9 grid, 0.75mm pitch, 6.0mm x 8.0mm x 1.0mm)
www.micron.com/support/designsupport/tools/fbga/decoder
BC GB -70
10
Micron Technology, Inc., reserves the right to change products or specifications without notice.
8
WT ES
Part-Numbering Information
Production Status
Blank = Production
ES = Engineering sample
MS = Mechanical sample
Operating Temperature
WT = –30°C to +85°C
IT = –40° to +85°C
Standby Power Options
Blank = Standard
L = Low power
Frequency
1 = 104 MHz
13 = 133 MHz
Access/Cycle Time
70 = 70ns
8 = 80 MHz
©2005 Micron Technology, Inc. All rights reserved.
to verify that