GP1A21 Sharp Electronics, GP1A21 Datasheet - Page 4

• Manufacturer Part Number: GP1A21
• Manufacturer: Sharp Electronics
• Type: Transmissiver

Specifications of GP1A21

• Number Of Elements: 1
• Gap Width: 5mm
• Slit Width: 0.5mm
• Pin Count: 3
• Mounting: Snap in
• Operating Temp Range: -20C to 75C
• Operating Temperature Classification: Commercial
• Lead Free Status / Rohs Status: Not Compliant

( 1 ) In this product, the PWB is fixed with a resin cover, and cleaning solvent may remain
( 2 ) Remove dust or stains, using anair blower or soft cloth moistened in cleaning solvent.
( 3 ) In order to stabilize power supply line, connect a by-pass capacitor of more than 0.01 F
( 4 ) As for other general cautions, refer to the chapter “Precautions for Use . ”
Precautions for Use
However, do not perform the above cleaning using a soft cloth with cleaning solvevt in the
marking portion.
In this case use only the following type of cleaning solvent used for wiping off:
Ethyl alcohol, Methyl alcohol, Isopropyl alcohol.
When the cleaning solvents except for specified materials are used, please consult us.
between Vcc and GND near the device.
inside the case; therefore,dip cleaning or ultrasonic cleaning are prohibited.
GP1A21