NL6448BC33-31 NEC Electronics, NL6448BC33-31 Datasheet - Page 20

• Manufacturer Part Number: NL6448BC33-31
• Manufacturer: NEC Electronics

Specifications of NL6448BC33-31

• Lead Free Status / Rohs Status: Not Compliant

GENERAL CAUTIONS
(1) Caution when taking out the module
(2) Cautions for handling the module
(3) Cautions for the atmosphere
(4) Cautions for the module characteristics
20
Next figures and sentence are very important. Please understand these contents as follows.
a) Pick the pouch only, when taking out the module from a carrier box.
a) As the electrostatic discharges may break the LCD module, handle the LCD module with care against
b)
c) As the surface of polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for
d) Do not pull the interface connectors in or out while the LCD module is operating.
e) Put the module display side down on a flat horizontal plane.
f)
g) When the module is operating, do not lose CLK, Hsync or Vsync signal. If any one or more of these signals
h) The torque for mounting screws should never exceed 0.294 N·m (3 kgf·cm).
a) Dew drop atmosphere must be avoided.
b) Do not store and/or operate the LCD module in high temperature and/or high humidity atmosphere.
c) This module uses cold cathod fluorescent lamps.
d) Do not operate the LCD module in high magnetic field.
a) Do not apply any fixed patterns data signal for a long time to the LCD module at product aging. It may
b) This module has the retardation film which may cause the variation of color hue in the different viewing
Do not touch an inverter, on which is stuck a caution label, while the LCD module is under the operation, because
of dangerous high voltage.
CAUTIONS
electrostatic discharges.
cleaning.
Handle connectors and cables with care.
is lost, the LCD panel would be damaged.
Storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere
is recommended.
conspicuously at low temperature.
cause image sticking.
angles. The ununiformity may appear on the screen under the high temperature operation.
CAUTION
This figure is a mark that you will get an electric shock when you make a mistake to operate.
This figure is a mark that you will get hurt when you make a mistake to operate
As the LCD panel and backlight element are made from fragile glass material, impulse and
pressure to the LCD module should be avoided.
This figure is a mark that you will get hurt and/or the module will have damages when you make
a mistake to operate.
Data Sheet EN0443EJ1V0DS00
Therefore, the life time of lamp becomes short
NL6448BC33-31