LQ084V3DG02 Sharp Electronics, LQ084V3DG02 Datasheet - Page 17

• Manufacturer Part Number: LQ084V3DG02
• Manufacturer: Sharp Electronics

Specifications of LQ084V3DG02

• Lead Free Status / Rohs Status: Compliant

14
15
No.
1 High temperature storage test
2 Low temperature storage test
3 High temperature
4 High temperature operation test
5 Low temperature operation test
6 Strength against ESD
7 Shock test
8 Vibration test
9 Thermal shock test
[Result Evaluation Criteria]
[Note] The directions of X, Y, Z are defined as below:
& high humidity operation test
(non- operating)
(non- operating)
d) Liquid crystal panel drive input FFC/FPC specification
a) Variable resister has been set optimally before shipment, so do not change any
c) Image retention may occur when the fixed image is display for long time.
b) Don’t disassemble this module, it may cause malfunction.
Miscellaneous
Reliability Test Items
e) When any question or issue occurs, it shall be solved by mutual discussion.
adjusted value. If adjusted value is changed, the specification may be not satisfied.
・ The following FFC/FPC is recommended for input connector.
・ The terminal of FFC/FPC of input connector recommend to be gold or gold plated.
Under the display quality test conditions with normal operation state, these shall be no change
which may affect practical display function.
Because point of contact of the connection is gold plated.
Test parameter
[IMSA-9637S-33Y902 (IRISO Electronics co.,ltd.) , 33pin 0.5mm pitch)]
X
Leaves the module at Ta=80°C for 240h
Leaves the module at Ta=-30°C for 240h
Operates the module at Ta=40°C;90~95%RH for 240h
(No condensation)
Operates the module with +80°C at panel surface for 240h
Operates the module at Ta=-30°C for 240h
±200V ・ 200pF [0Ω] one time for each terminal
Max. acceleration : 686m/s 2 (70G) Pulse width : 6ms, half sine wave
Direction : ±X,±Y,±Z
Frequency : 10 ∼ 57Hz/Vibration width (one side):0.15mm
: 58 ∼ 500Hz/ acceleration:19.6m/s 2
Test period : 3 hours
-30°C[0.5h] ~ +80°C[0.5h] /50 cycle
Z
Y
(1 hour for each direction of X,Y,Z)
once for each direction.
Conditions
Sweep time : 11 minutes
LD-19Z60A-15