PS2505-4-A CALIFORNIA EASTERN LABS, PS2505-4-A Datasheet - Page 12
![no-image](/images/manufacturer_photos/0/1/119/california_eastern_labs_sml.jpg)
PS2505-4-A
Manufacturer Part Number
PS2505-4-A
Description
Manufacturer
CALIFORNIA EASTERN LABS
Datasheet
1.PS2505-4-A.pdf
(15 pages)
Specifications of PS2505-4-A
Input Type
AC
Output Type
DC
Output Device
Transistor
Number Of Elements
4
Forward Voltage
1.4V
Forward Current
80/chmA
Collector-emitter Voltage
80V
Package Type
PDIP
Isolation Voltage
5000Vrms
Collector-emitter Saturation Voltage
0.3V
Current Transfer Ratio
600%
Pin Count
16
Mounting
Through Hole
Operating Temp Range
-55C to 100C
Operating Temperature Classification
Industrial
Lead Free Status / Rohs Status
Compliant
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
(2) Wave soldering
(3) Soldering by soldering iron
10
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Peak temperature (lead part temperature)
• Time (each pins)
• Flux
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
120°C
(preheating)
120±30 s
Data Sheet PN10228EJ03V0DS
350°C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
180°C
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Time (s)
(heating)
to 60 s
to 10 s
PS2505-1,-4,PS2505L-1,-4
260°C MAX.
220°C