MT48LC4M16A2TG75IT Micron Technology Inc, MT48LC4M16A2TG75IT Datasheet - Page 41

• Manufacturer Part Number: MT48LC4M16A2TG75IT
• Manufacturer: Micron Technology Inc
• Type: SDRAMr

Specifications of MT48LC4M16A2TG75IT

• Organization: 4Mx16
• Density: 64Mb
• Address Bus: 14b
• Access Time (max): 6/5.4ns
• Maximum Clock Rate: 133MHz
• Operating Supply Voltage (typ): 3.3V
• Package Type: TSOP-II
• Operating Temp Range: -40C to 85C
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Supply Current: 140mA
• Pin Count: 54
• Mounting: Surface Mount
• Operating Temperature Classification: Industrial
• Lead Free Status / Rohs Status: Not Compliant

PDF: 09005aef80725c0b/Source: 09005aef806fc13c
64MSDRAM_2.fm - Rev. N 12/08 EN
10. READs or WRITEs listed in the Command (Action) column include READs or WRITEs with
11. Does not affect the state of the bank and acts as a NOP to that bank.
6. All states and sequences not shown are illegal or reserved.
7. Not bank-specific; requires that all banks are idle.
8. May or may not be bank-specific; if all banks are to be precharged, all must be in a valid
9. Not bank-specific; BURST TERMINATE affects the most recent READ or WRITE burst, regard-
state for precharging.
less of bank.
auto precharge enabled and READs or WRITEs with auto precharge disabled.
Accessing mode
Precharging all: Starts with registration of a PRECHARGE ALL command and ends when
register:
Starts with registration of a LOAD MODE REGISTER command and ends
when
banks idle state.
t
RP is met. After
t
MRD has been met. After
41
t
RP is met, all banks will be in the idle state.
Micron Technology, Inc., reserves the right to change products or specifications without notice.
t
MRD is met, the SDRAM will be in the all
64Mb: x4, x8, x16 SDRAM
©2000 Micron Technology, Inc. All rights reserved.
Commands