MT45W2MW16PGA-70 WT Micron Technology Inc, MT45W2MW16PGA-70 WT Datasheet - Page 8

• Manufacturer Part Number: MT45W2MW16PGA-70 WT
• Manufacturer: Micron Technology Inc

Specifications of MT45W2MW16PGA-70 WT

• Operating Temperature (max): 85C
• Mounting: Surface Mount
• Operating Temperature Classification: Commercial
• Lead Free Status / Rohs Status: Compliant

Part-Numbering Information
Figure 3:
Valid Part Number Combinations
Device Marking
PDF: 09005aef82832fa7 / Source: 09005aef82832f97
32mb_asyncpage_cr1_0_p24z_2.fm - Rev. B 12/09 EN
Part Number Chart
Notes:
Micron CellularRAM devices are available in several different configurations and densi-
ties (see Figure 3).
1. –30°C exceeds the CellularRAM Workgroup 1.0 specification of –25°C.
After building the part number from the part numbering chart, visit the Micron Web site
at
device required is not on this list, contact the factory.
Due to the size of the package, the Micron standard part number is not printed on the
top of the device. Instead, an abbreviated device mark consisting of a five-digit alphanu-
meric code is used. The abbreviated device marks are cross-referenced to the Micron
part numbers at the FBGA Part Marking Decoder
To view the location of the abbreviated mark on the device, refer to customer service
note, CSN-11, “Product Mark/Label,” at www.micron.com/csn.
Micron Technology
Product Family
45 = PSRAM/CellularRAM Memory
Operating Core Voltage
W = 1.7V–1.95V
Address Locations
M = Megabits
Operating Voltage
W = 1.7V–3.6V
Bus Configuration
16 = x16
READ/WRITE Operation Mode
P = Asynchronous/Page
www.micron.com/psram
32Mb: 2 Meg x 16 Async/Page CellularRAM 1.0 Memory
Package Codes
GA = VFBGA “Green” (6 x 8 grid, 0.75mm pitch, 6.0mm x 8.0mm x 1.0mm) 48-ball
MT 45 W 2M W
to verify that the part number is offered and valid. If the
8
16
Micron Technology, Inc., reserves the right to change products or specifications without notice.
P
GA -70
site,
Part-Numbering Information
http://www.micron.com/decoder.
WT ES
©2007 Micron Technology, Inc. All rights reserved.
Production Status
Blank = Production
ES = Engineering Sample
MS = Mechanical Sample
Operating Temperature
WT = –30°C to +85°C (see Note 1)
IT = –40°C to +85°C
Standby Power Options
Blank = Standard
Access/Cycle Time
70 = 70ns