HS2678REPI61H Renesas Electronics America, HS2678REPI61H Datasheet - Page 32

• Manufacturer Part Number: HS2678REPI61H
• Manufacturer: Renesas Electronics America

Specifications of HS2678REPI61H

• Lead Free Status / Rohs Status: Supplier Unconfirmed

5.2
Insert the CD-R (HS2678REPI61SR supplied with the E6000) into the CD-ROM drive of the host
computer by pressing the Shift key, move the current directory to <Drive>:\Diag with a command
prompt, and enter one of the following commands according to the PC interface board used to
initiate the test program:
1. ISA bus interface boad (HS6000EII01H)
2. PCI bus interface boad (HS6000EIC01H or HS6000EIC02H)
3. PCMCIA interface card (HS6000EIP01H)
4. LAN adapter (HS6000ELN01H)
The HDI must be installed before the test program is executed.
than <Drive>:\Diag, such as > <Drive>:\Diag\TM2678R -ISA (RET). If the test program is
initiated when the current directory is not <Drive>:\Diag, the test program will not operate
correctly.
When -S is added to the command line such as > TM2678R -ISA -S (RET), steps 1 to 19 will be
repeatedly executed. To stop the execution, enter Q. When -Lfilename is added to the command
line such as > TM2678R -ISA -Lfilename (RET), the log name at the execution is saved in
filename. When -? is added to the command line such as > TM2678R -ISA -? (RET), online help
(option) is displayed.
Notes: 1. When the CD-R is inserted into the CD-ROM drive without pressing the Shift key, the
14
Be sure to initiate the test program from <Drive>:\Diag. Do not initiate it from a directory other
> TM2678R -ISA (RET)
> TM2678R -PCI (RET)
> TM2678R -PCCD (RET)
> TM2678R -ELN (RET)
2.
3.
Diagnostic Test Procedure Using the Test Program
HDI installation wizard is automatically started.
In such a case, exit the HDI installation wizard.
<Drive> is a drive name for the CD-ROM drive.
Do not remove the CD-R from the CD-ROM drive during test program execution.