1N3018BJAN SEMICOA, 1N3018BJAN Datasheet

1N3018BJAN

Manufacturer Part Number
1N3018BJAN
Description
Manufacturer
SEMICOA
Type
Voltage Regulatorr
Datasheet

Specifications of 1N3018BJAN

Number Of Elements
Single
Package Type
DO-13
Zener Voltage (typ)
8.2V
Zener Test Current
31mA
Voltage Tolerance
5%
Power Dissipation
1000mW
Knee Impedance
4.5Ohm
Operating Temperature Classification
Military
Rev Curr
50uA
Mounting
Through Hole
Pin Count
2
Operating Temp Range
-55C to 125C
Lead Free Status / Rohs Status
Not Compliant
Copyright © 2006
3-12-2006 REV B
IMPORTANT: For the most current data, consult MICROSEMI’s website:
This well established zener diode series for the 1N3016 thru 1N3051
JEDEC registration in the metal case DO-13 package provides a glass
hermetic seal for 6.8 to 200 volts. It is also well suited for high-reliability
applications where it is available in JAN, JANTX, and JANTXV military
qualifications.
1N3830 series (3.3 V to 7.5 V) in the same package (see separate data
sheet). Microsemi also offers numerous other Zener diode products for a
variety of other packages including surface mount.
*
Zener Voltage Range: 6.8V to 200V
Hermetically sealed DO-13 metal package
Internally solder-bonded construction.
Also available in JAN, JANTX, JANTXV qualifications
per MIL-PRF19500/115 by adding the JAN, JANTX,
or JANTXV prefixes to part numbers for desired level
of screening, e.g. JANTX1N3016B,
JANTXV1N3051B, etc.
Surface mount also available with 1N3016BUR-1 thru
1N3051BUR-1 series on separate data sheet
RoHS Compliant devices available by adding “e3” suffix
Operating Junction and Storage Temperatures:
THERMAL RESISTANCE: 50
at 0.375 inches (10 mm) from body or 110
junction to ambient when leads are mounted on FR4
PC board with 4 mm
width 1 mm, length 25 mm
DC Power Dissipation
(10 mm) from body or 1.0 Watts at T
mounted on FR4 PC board as described for thermal
resistance above (also see Fig 1)
Forward Voltage @ 200 mA: 1.5 Volts.
Solder Temperatures: 260
-65
For further mounting reference options, thermal resistance from junction to metal case is
when mounting DO-13 metal case directly on heat sink.
o
C to +175
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
MAXIMUM RATINGS
Lower voltages are also available in the 1N3821 thru
S C O T T S D A L E D I V I S I O N
o
C
FEATURES
2
copper pads (1 oz) and track
*
: 1.0 Watt at T
DESCRIPTION
o
C for 10 s (maximum)
o
C/W* junction to lead
L
L
< +65
< +125
o
C/W
o
C when
Scottsdale Division
Microsemi
o
C 3/8”
1 WATT METAL CASE ZENER DIODES
http://www.microsemi.com
1N3016B thru 1N3051B, e3
CASE: DO-13 (DO-202AA), welded, hermetically
FINISH: All external surfaces are Tin-Lead (Pb/Sn)
POLARITY: Cathode connected case.
WEIGHT: 1.4 grams.
Tape & Reel option: Standard per EIA-296 (add
See package dimensions on last page
sealed metal and glass
or RoHS Compliant annealed matte-Tin (Sn) plating
and solderable per MIL-STD-750 method 2026
“TR” suffix to part number)
MECHANICAL AND PACKAGING
Regulates voltage over a broad operating current
and temperature range
Wide selection from 6.8 to 200 V
Tight voltage tolerances available
Low reverse (leakage) currents
Nonsensitive to ESD
Hermetically sealed metal package
Inherently radiation hard as described in
Microsemi MicroNote 050
APPLICATIONS / BENEFITS
APPEARANCE
<
20
DO-13
o
C/W
Page 1

Related parts for 1N3018BJAN

1N3018BJAN Summary of contents

Page 1

DESCRIPTION This well established zener diode series for the 1N3016 thru 1N3051 JEDEC registration in the metal case DO-13 package provides a ...

Page 2

*ELECTRICAL CHARACTERISTICS @ 25 NOMINAL ZENER ZENER VOLTAGE TEST JEDEC CURRENT TYPE Z ZT (Note 2) I NUMBER ZT ...

Page 3

– Lead Temperature ( C) 3/8” from body FR4 PC Board A FIGURE 1 Power Derating ...

Related keywords