EWA-P10C15D14 Panasonic, EWA-P10C15D14 Datasheet - Page 3

• Manufacturer Part Number: EWA-P10C15D14
• Description: Slide Potentiometers 10KOhms SLIDE 45MM STD FADER
• Manufacturer: Panasonic

Specifications of EWA-P10C15D14

• Product: Slide Potentiometers
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3. Tracking
Tracking on dual slide potentiometer is measured by fol low ing formula with 2 V to 5 V applied voltage, at
1000±200 Hz between terminal 1 and 3.
Tracking error (dB)=20 log (V
Where:
V
V
●
1. Sliding Force
In a room at 5 °C to 35 °C, apply a sliding force to the le ver at a point of 5.0 mm from the mounting sur face at a
rate of 30.0 mm/1 to 2 seconds. The sliding force shall be 0.4 N to 3.5 N.
2. Lever Wobble
When a moment of 25 mN·m is applied perpendicularly on the top of the lever, the wobble of lever tip shall be
within 3 L/10 mm max. for one side. Where: L=Length of lever
3. Lever Angle
The angle of lever from the mounting surface shall be 90 °±2 ° max.
4. Detent Slip-out Force
In a room at 5 °C to 35 °C, detent slip-out force shall be 0.2 N to 1.5 N greater than the sliding force of lever.
5. Operating Life
15000 cycles min.
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
1
2
=output voltage of one side (between terminal 1 and 2)
=output voltage of the other side (between terminal 1 and 2)
Mechanical Specifi cations
50 % of Sliding Position
Range
–40 dB to 0 dB
–30 dB to 0 dB
2
/V
1
)
Type
15.0, 20.0 mm
±3 dB
For volume
F
30.0, 45.0, 60.0 mm
±3 dB
Slide Potentiometers/EWAK/M/N/P/Q
General purpose
±3 dB
Nov. 2005