ATF1504AS-7AX100 Atmel, ATF1504AS-7AX100 Datasheet - Page 8

• Manufacturer Part Number: ATF1504AS-7AX100
• Description: IC CPLD 7NS 100TQFP
• Manufacturer: Atmel
• Series: ATF1504AS(L)r

Specifications of ATF1504AS-7AX100

• Programmable Type: In System Programmable (min 10K program/erase cycles)
• Delay Time Tpd(1) Max: 7.5ns
• Voltage Supply - Internal: 4.75 V ~ 5.25 V
• Number Of Macrocells: 64
• Number Of I /o: 64
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP, 100-VQFP
• Voltage: 5V
• Memory Type: EEPROM
• Family Name: ATF1504AS
• # Macrocells: 64
• Number Of Usable Gates: 1500
• Frequency (max): 166.7MHz
• Propagation Delay Time: 7.5ns
• Number Of Logic Blocks/elements: 4
• # I/os (max): 64
• Operating Supply Voltage (typ): 5V
• In System Programmable: Yes
• Operating Supply Voltage (min): 4.75V
• Operating Supply Voltage (max): 5.25V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 100
• Package Type: TQFP
• For Use With: ATF15XX-DK3 - KIT DEV FOR ATF15XX CPLD'S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Number Of Logic Elements/cells: -
• Lead Free Status / Rohs Status: Compliant

Programmable Pin-
keeper Option for
Inputs and I/Os
Input Diagram
Speed/Power
Management
I/O Diagram
8
ATF1504AS(L)
The ATF1504AS offers the option of programming all input and I/O pins so that pin-
keeper circuits can be utilized. When any pin is driven high or low and then subse-
quently left floating, it will stay at that previous high- or low-level. This circuitry prevents
unused input and I/O lines from floating to intermediate voltage levels, which causes
unnecessary power consumption and system noise. The keeper circuits eliminate the
need for external pull-up resistors and eliminate their DC power consumption.
The ATF1504AS has several built-in speed and power management features. The
ATF1504AS contains circuitry that automatically puts the device into a low-power
standby mode when no logic transitions are occurring. This not only reduces power con-
sumption during inactive periods, but also provides proportional power savings for most
applications running at system speeds below 5 MHz. This feature may be selected as a
device option.
To further reduce power, each ATF1504AS macrocell has a Reduced Power bit feature.
This feature allows individual macrocells to be configured for maximum power savings.
This feature may be selected as a design option.
All ATF1504AS also have an optional power-down mode. In this mode, current drops to
below 10 mA. When the power-down option is selected, either PD1 or PD2 pins (or
both) can be used to power-down the part. The power-down option is selected in the
design source file. When enabled, the device goes into power-down when either PD1 or
PD2 is high. In the power-down mode, all internal logic signals are latched and held, as
are any enabled outputs.
0950O–PLD–7/05