EP2C8F256I8 Altera, EP2C8F256I8 Datasheet - Page 72

• Manufacturer Part Number: EP2C8F256I8
• Description: IC CYCLONE II FPGA 8K 256-FBGA
• Manufacturer: Altera
• Series: Cyclone® IIr

Specifications of EP2C8F256I8

• Number Of Logic Elements/cells: 8256
• Number Of Labs/clbs: 516
• Total Ram Bits: 165888
• Number Of I /o: 182
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 256-FBGA
• Family Name: Cyclone® II
• Number Of Logic Blocks/elements: 8256
• # I/os (max): 182
• Frequency (max): 402.58MHz
• Process Technology: 90nm
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 8256
• Ram Bits: 165888
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 256
• Package Type: FBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant
• Other names: 544-2150

I/O Structure & Features
2–60
Cyclone II Device Handbook, Volume 1
Table 2–20. Cyclone II MultiVolt I/O Support (Part 1 of 2)
V
CCIO
1.5
1.8
2.5
(V)
v
1.5 V
v
(4)
1.8 V
v
v
standards (e.g., SSTL-2) independently. If an I/O bank does not use
voltage-referenced standards, the VREF pins are available as user I/O
pins.
Each I/O bank can support multiple standards with the same V
input and output pins. For example, when V
support LVTTL, LVCMOS, and 3.3-V PCI for inputs and outputs.
Voltage-referenced standards can be supported in an I/O bank using any
number of single-ended or differential standards as long as they use the
same V
MultiVolt I/O Interface
The Cyclone II architecture supports the MultiVolt I/O interface feature,
which allows Cyclone II devices in all packages to interface with systems
of different supply voltages. Cyclone II devices have one set of V
(VCCINT) that power the internal device logic array and input buffers that
use the LVPECL, LVDS, HSTL, or SSTL I/O standards. Cyclone II devices
also have four or eight sets of VCC pins (VCCIO) that power the I/O
output drivers and input buffers that use the LVTTL, LVCMOS, or PCI
I/O standards.
The Cyclone II VCCINT pins must always be connected to a 1.2-V power
supply. If the V
and 3.3-V tolerant. The VCCIO pins can be connected to either a 1.5-V,
1.8-V, 2.5-V, or 3.3-V power supply, depending on the output
requirements. The output levels are compatible with systems of the same
voltage as the power supply (i.e., when VCCIO pins are connected to a
1.5-V power supply, the output levels are compatible with 1.5-V systems).
When VCCIO pins are connected to a 3.3-V power supply, the output high
is 3.3-V and is compatible with 3.3-V systems.
Cyclone II MultiVolt I/O support.
Input Signal
REF
v
v
2.5 V
v
and a compatible V
(2)
(2)
CCINT
v
v
3.3 V
level is 1.2 V, then input pins are 1.5-V, 1.8-V, 2.5-V,
v
(2)
(2)
CCIO
v
v
Note (1)
1.5 V
v
(3)
(5)
value.
v
1.8 V
v
Output Signal
CCIO
(5)
Table 2–20
is 3.3-V, a bank can
2.5 V
Altera Corporation
v
summarizes
February 2007
CCIO
CC
3.3 V
pins
for