552302-1 Tyco Electronics, 552302-1 Datasheet - Page 10

• Manufacturer Part Number: 552302-1
• Description: I/O Connectors 36PIN SCR LCK PLUG
• Manufacturer: Tyco Electronics

Specifications of 552302-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6. VISUAL AID
Figure 9 shows a typical application of CHAMP Cable Connectors. This illustration should be used by
production personnel to ensure a correctly applied product. Applications which DO NOT appear correct should
be inspected using the information in the preceding pages of this specification and in the instructional material
shipped with the product or tooling.
WIRE SHOULD
BE BELOW
LEAD- IN
WIRE SHOULD
BE IN BOTH
SLOTS
10 of 10
The following conditions constitute non- acceptable terminations, and the contact should be removed and re-
placed.
NOTE: This condition is non- acceptable
only if the slot is not specifically
designed for a two- wire application.
WIRE END
MUST
PROTRUDE
FROM
SECOND
CONTACT
BEAM
1. Shoulders are bent and not parallel.
2. Shoulders are bent, bowed, and not parallel.
3. Contact is broken.
4. Strain relief slot is bent inward.
5. Strain relief slot is bent outward.
6. Strain relief slot is bent outward and contact slot is bent inward.
7. Contact is loose and bent.
8. Contact is crushed.
9. Two wires are in the same slot.
INSPECTION FEATURES
FIGURE 9. VISUAL AID
ACCEPTABLE
DEFORMATION
SLOT MUST
REMAIN
PARALLEL
7
4
1
NON- ACCEPTABLE CONTACTS
CONNECTORS MUST BE FULLY
MATED AND HARDWARE EVENLY
AND FIRMLY TIGHTENED
2
5
8
6
3
114- 6041
Rev B
9