DF16(2.5)-20DP-0.5V(86) Hirose Electric Co Ltd, DF16(2.5)-20DP-0.5V(86) Datasheet - Page 8
![no-image](/images/manufacturer_photos/0/3/300/hirose_electric_co_ltd_sml.jpg)
DF16(2.5)-20DP-0.5V(86)
Manufacturer Part Number
DF16(2.5)-20DP-0.5V(86)
Description
Board to Board / Mezzanine Connectors 20P DBL ROW PIN HDR STRAIGHT SMT
Manufacturer
Hirose Electric Co Ltd
Series
DF16 Seriesr
Datasheet
1.DF162.5-50DP-0.5V86.pdf
(8 pages)
Specifications of DF16(2.5)-20DP-0.5V(86)
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
DF16(2.5)-20DP-0.5V(86)
Manufacturer:
Hirose Electric Co Ltd
Quantity:
12 000
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BPrecautions
1. Recommended Temperature Profile (SMT)
2. Recommended Manual Soldering Condition (SMT)
3. Recommended Screen Thickness (SMT)
4. Board Warp (SMT)
5. Cleaning Condition
6. Cautions
Note1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that
Note2: The temperature profile indicates the board surface temperature at the point of contacts
Note3: Environment for header is room air only.
Soldering iron temperature: 350, Soldering time: Within 3 seconds
0.15mm
Maximum 0.02mm in the connector center area, based on the both connector edges
Refer to the "Nylon Connector Use Hand book".
would cause contact failure or electrostatic element damage.
according to the manufacturing lot. However, the difference doesn't affect the performance.
The header is designed in a structure where contacts are exposed. Touching it with bare hands
Where no board is mounted, the insertion or extraction will cause damage or contact deformation.
Avoid retaining the board with the connector only, and fix the board by any other means than the connector.
Excessive scoop insertion or extraction may result in damage.
In the manual soldering process, don't carry out flux coating which will cause a flux blister on the connector.
The color phase of this product may be slightly different from that of the formed product
there is a return to normal temperature between the first and second cycle.
with the connector terminals.
DF16 Series 0.5mm Pitch SMT Board to Board Connector
A211