105708-003 Amphenol, 105708-003 Datasheet - Page 115

• Manufacturer Part Number: 105708-003
• Description: RF Connectors UHF
• Manufacturer: Amphenol

Specifications of 105708-003

• Product: Connector
• Rf Series: UHF
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

114
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
CLASS DESCRIPTIONS
PERFORMANCE SPECIFICATIONS
** Service Rating is comparable to MS rating A. Miniature connectors rated Service Rating I will provide a minimum flashover
Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer’s
hands, as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit.
OPERATING TEMPERATURE RANGE
–65°C (–85°F) to 200°C (392°F)
ENVIRONMENTAL SEAL
Wired, mated connectors with the specified accessory
attached will meet the altitude immersion test specified
in MIL-DTL-26482.
DURABILITY
Minimum of 500 mating cycles.
Amphenol
* Ref. MIL-DTL-26482
MIL-DTL-26482, Series 2
voltage at sea level of 2,000 volts AC (RMS). Service Rating II is comparable to MS Service Rating D, and will provide a minimum
flashover voltage of 2,800 volts AC (RMS) at sea level.
Service
Rating
II
I
Class W
Military
Class R
Class L
Class E
Class A
–
Aerospace
Operating AC Voltage
Recommended
at Sea Level
1,000
600
Amphenol/Matrix
Commercial MB1
Class W
Class R
Class G
Class A
Series
–
–
MIL-DTL-26482, Series 2, Matrix
Class Descriptions, Performance Specifications
SERVICE RATINGS**
Sea Level
1,500
2,300
Aluminum shell, electroless nickel finish, fluid resistant
Inactive, superceded by Class L*
Inactive, superceded by Class L*
Aluminum shell, black non-conductive anodized finish, fluid resistant
Stainless steel shell, passivated, fluid resistant
Aluminum shell, olive drab cadmium plated, corrosion/fluid resistant
SHOCK AND VIBRATION REQUIREMENTS
When tested as follows, the connector shall sustain no
physical damage, or electrical discontinuity exceeding
one microsecond.
SHOCK:
Pulse of an approximate half sine wave of 300g magnitude
with duration of 3 milliseconds applied in three axes.
VIBRATION:
Sixteen hours of random vibration having a range of 50 to
2,000 Hz with a 41.7G peak level.
Test Voltage AC (RMS), 60 cps
50,000 ft.
500
750
Description
70,000 ft.
375
500
110,000 ft.
200
200
®