20-101-0405 Rabbit Semiconductor, 20-101-0405 Datasheet - Page 23

• Manufacturer Part Number: 20-101-0405
• Description: MODULE RABBITCORE RCM2010
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0405

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 2000
• Flash: 256 KBytes
• Operating Supply Voltage: 4.75 to 5.25 V
• Board Size: 58.4 mm x 48.3 mm x 14 mm
• For Use With/related Products: RCM2010
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1084

•
•
•
User’s Manual
FLASHLEDS.C
tions, and costatements to flash LEDs DS2 and DS3 on the Prototyping Board on and
off. LEDs DS2 and DS3 are controlled by Parallel Port A bit 0 (PA0) and Parallel Port
A bit 1 (PA1).Once you have compile this program and it is running, LEDs DS2 and
DS3 will flash on/off at different rates.
FLASHLEDS2.C
DS2 and DS3 on the Prototyping Board on and off. LEDs DS2 and DS3 are controlled
by Parallel Port A bit 0 (PA0) and Parallel Port A bit 1 (PA1).Once you have compile
this program and it is running, LEDs DS2 and DS3 will flash on/off at different rates.
KEYLCD.C
Connect the keypad to Parallel Ports B, C, and D.
Connect the LCD to Parallel Port A.
Once the connections have been made and the sample program is running, the LCD
will display two rows of 6 dots, each dot representing the corresponding key. When a
key is pressed, the corresponding dot will become an asterisk.
PB0—Keypad Col 0
PC1—Keypad Col 1
PB2—Keypad Col 2
PB3—Keypad Col 3
PB4—Keypad Col 4
PB5—Keypad Col 5
PD6—Keypad Row 0
PD7—Keypad Row 1
PA0—backlight (if connected)
PA1—LCD /CS
PA2—LCD RS (High = Control,
Low = Data) / LCD Contrast 0
PA3—LCD /WR/ LCD Contrast 1
PA4—LCD D4 / LCD Contrast 2
PA5—LCD D5 / LCD Contrast 3
PA6—LCD D6 / LCD Contrast 4
PA7—LCD D7 / LCD Contrast 5
—demonstrates a simple setup for a 2 × 6 keypad and a 2 × 20 LCD.
—demonstrates the use of coding with assembly instructions, cofunc-
—demonstrates the use of cofunctions and costatements to flash LEDs
W
19