20-101-1154 Rabbit Semiconductor, 20-101-1154 Datasheet - Page 13

• Manufacturer Part Number: 20-101-1154
• Description: MODULE RCM4120 RABBITCORE
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1154

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 4000
• Flash: 512 KBytes
• Operating Supply Voltage: 3 to 3.6 V
• Board Size: 48 mm x 36 mm x 12 mm
• For Use With/related Products: RCM4120
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1122

2.2.2 Step 2 — Attach Module to Prototyping Board
Turn the RCM4100 module so that the mounting holes line up with the corresponding
holes on the Prototyping Board. Insert the metal standoffs as shown, secure them from the
bottom using two screws and washers, then insert the module’s header J2 on the bottom
side into socket RCM1 on the Prototyping Board.
Press the module’s pins gently into the Prototyping Board socket—press down in the area
above the header pins. For additional integrity, you may secure the RCM4100 to the stand-
offs from the top using the remaining two screws and washers.
User’s Manual
NOTE: It is important that you line up the pins on header J2 of the module exactly with
socket RCM1 on the Prototyping Board. The header pins may become bent or damaged
if the pin alignment is offset, and the module will not work. Permanent electrical dam-
age to the module may also result if a misaligned module is powered up.
Figure 3. Install the Module on the Prototyping Board
9