20-101-1094 Rabbit Semiconductor, 20-101-1094 Datasheet - Page 84

• Manufacturer Part Number: 20-101-1094
• Description: MCU RCM4000 RABBITCORE
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1094

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 4000
• Clock Speed: 58.98 MHz
• Interface Type: Ethernet, Serial
• Flash: 512 KB
• Timers: 10 x 8 bit, 1 x 10 bit, 1 x 16 bit
• Operating Supply Voltage: 3 V to 3.6 V
• Board Size: 47 mm x 61 mm x 20 mm
• Core: RCM4000
• Processor Series: RCM4000
• Cpu Core: Rabbit 4000
• For Use With/related Products: RCM4000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1139

6.4.1 How to Set IP Addresses in the Sample Programs
With the introduction of Dynamic C 7.30 we have taken steps to make it easier to run
many of our sample programs. You will see a
Dynamic C to select your configuration from a list of default configurations. You will
have three choices when you encounter a sample program with the
1. You can replace the
2. You can leave
3. You can create a
There are some other “standard” configurations for
ent features such as DHCP. Their values are documented at the top of the
FIG.LIB
Dynamic C TCP/IP User’s Manual.
78
MASK
to
to
address of
edit the values in the section that directly follows the “General Configuration” com-
ment in the
directory.
than 100. Instructions for doing this are at the beginning of the
library in the
10.10.6.100
10.10.6.1
,
MY_GATEWAY
library in the
10.1.1.2
TCP_CONFIG.LIB
LIB\TCPIP
TCPCONFIG
. If you would like to change the default values, for example, to use an IP
CUSTOM_CONFIG.LIB
, the netmask to
, and
TCPCONFIG
LIB\TCPIP
for the RCM4000 module, and
MY_NAMESERVER
directory.
at the usual default of 1, which will set the IP configurations
library. You will find this library in the
macro with individual
directory. More information is available in the
255.255.255.0
library and use a
TCPCONFIG
macros in each program.
TCPCONFIG
, and the nameserver and gateway
10.1.1.1
MY_IP_ADDRESS
macro. This macro tells
TCPCONFIG
that let you select differ-
TCP_CONFIG.LIB
TCPCONFIG
for your PC, you can
RabbitCore RCM4000
TCP_CON-
LIB\TCPIP
value greater
,
MY_NET-
macro.