20-101-1247 Rabbit Semiconductor, 20-101-1247 Datasheet - Page 66

• Manufacturer Part Number: 20-101-1247
• Description: CORE MODULE RCM5450W
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1247

• Module/board Type: MPU Core Module
• Wireless Frequency: 73.73 MHz
• For Use With/related Products: RCM5450W
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1149

6.2.3 Configuration Information
6.2.3.1 Network/Wi-Fi Configuration
Any device placed on an Ethernet-based Internet Protocol (IP) network must have its own
IP address. IP addresses are 32-bit numbers that uniquely identify a device. Besides the IP
address, we also need a netmask, which is a 32-bit number that tells the TCP/IP stack what
part of the IP address identifies the local network the device lives on.
The sample programs configure the RCM5400W modules with a default
macro from the
allows specific IP address, netmask, gateway, and Wi-Fi parameters to be set at compile
time. Change the network settings to configure your RCM5400W module with your own
Ethernet settings only if that is necessary to run the sample programs; you will likely need
to change some of the Wi-Fi settings.
• Network Parameters
There are similar macros defined for the various Wi-Fi settings as explained in Section 6.3.1.
The Wi-Fi configurations are contained within
FIG 5
TCPCONFIG 1
There are some other “standard” configurations for
mented in the
is available in the Dynamic C TCP/IP User’s Manual.
60
These lines contain the IP address, netmask, nameserver, and gateway parameters.
#define _PRIMARY_STATIC_IP "10.10.6.100"
#define _PRIMARY_NETMASK
#define MY_NAMESERVER
#define MY_GATEWAY
(with DHCP, used primarily with infrastructure mode). You will need to
NOTE: TCPCONFIG 0 is not supported for Wi-Fi applications.
LIB\Rabbit4000\TCPIP\TCP_CONFIG.LIB
or
LIB\Rabbit4000\TCPIP\TCP_CONFIG.LIB
#define TCPCONFIG 5
"255.255.255.0"
"10.10.6.1"
"10.10.6.1"
at the beginning of your program.
TCPCONFIG 1
TCPCONFIG
library. More information
(no DHCP) and
. Their values are docu-
library. This macro
RabbitCore RCM5400W
TCPCONFIG
#define
TCPCON-