20-101-1235 Rabbit Semiconductor, 20-101-1235 Datasheet - Page 68

• Manufacturer Part Number: 20-101-1235
• Description: CORE MODULE RCM5700
• Manufacturer: Rabbit Semiconductor
• Type: Controllers & Processorsr

Specifications of 20-101-1235

• Module/board Type: MPU Core Module
• Number Of I/os: 32
• Memory Type: Flash, SRAM
• Interface Type: SPI
• Operating Voltage: 3.3 V
• Operating Current: 70 mA
• Operating Temperature Range: - 40 C to + 85 C
• Board Size: 50.8 mm x 30.5 mm
• Product: Modules
• For Use With/related Products: RCM5700
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 316-1153

C.1 Introduction
The Prototyping Board included in the Development Kit provides a prototyping area for more
advanced hardware development. The Prototyping Board is shown below in Figure C-1, with its
main features identified.
C.1.1 Prototyping Board Features
•
•
•
•
MiniCore RCM5700/RCM6700 User’s Manual
Power Connection
socket connections.
Power LED
Module Extension Headers
below header J2. Developers can solder wires directly into the appropriate holes, or, for more
flexible development, a 2 × 25 header strip with a 0.1" pitch can be soldered into place. See
Figure C-4 for the header pinouts.
Prototyping Area
hole and surface-mount components. +3.3 V and ground buses run along the left and right
edges of the through-hole prototyping area. The through-hole area is set up to accept compo-
nents with a pitch of 0.1" or widths of 0.3" or 0.6". Several areas for surface-mount devices are
also available. (Note that there are SMT pads on both the top and the bottom of the Prototyping
Board.) Each SMT pad is connected to a hole designed to accept a 30 AWG solid wire.
—The power LED lights whenever power is connected to the Prototyping Board.
—A generous prototyping area is provided for the installation of through-
—Power is supplied to the Prototyping Board via the MiniCore header
—The complete pin set of the MiniCore module is duplicated
Figure C-1. Prototyping Board
rabbit.com
68