20-101-1055 Rabbit Semiconductor, 20-101-1055 Datasheet - Page 43

• Manufacturer Part Number: 20-101-1055
• Description: MODULE RABBITCORE RCM3375
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1055

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 3000
• Flash: 512 KBytes
• Operating Supply Voltage: 3.15 to 3.45 V
• Board Size: 69 mm x 47 mm x 22 mm
• For Use With/related Products: RCM3375
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1112

A program “runs” in either mode, but can only be downloaded and debugged when the
RCM3365/RCM3375 is in the Program Mode.
Refer to the
gramming port.
4.3.2 Standalone Operation of the RCM3365/RCM3375
The RCM3365/RCM3375 must be programmed via the Prototyping Board or via a similar
arrangement on a customer-supplied board. Once the RCM3365/RCM3375 has been pro-
grammed successfully, remove the serial programming cable from the programming con-
nector and reset the RCM3365/RCM3375. The RCM3365/RCM3375 may be reset by
cycling the power off/on or by pressing the
RCM3365/RCM3375 module may now be removed from the Prototyping Board for end-
use installation.
User’s Manual
CAUTION: Disconnect power to the Prototyping Board or other boards when removing
or installing your RCM3365/RCM3375 module to protect against inadvertent shorts
across the pins or damage to the RCM3365/RCM3375 if the pins are not plugged in
correctly. Do not reapply power until you have verified that the RCM3365/RCM3375
module is plugged in correctly.
Rabbit 3000 Microprocessor User’s Manual
RESET
button on the Prototyping Board. The
for more information on the pro-
37