20-101-0492 Rabbit Semiconductor, 20-101-0492 Datasheet - Page 51

• Manufacturer Part Number: 20-101-0492
• Description: MODULE OP6800 FULL-FEATURED
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0492

• Module/board Type: Single Board Computer Module
• For Use With/related Products: OP6800
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 20-101-492; 20-101-492

4. Fasten the unit with the four 4-40 screws and washers included with the OP6800. If
User’s Manual
your panel is thick, use a 4-40 screw that is approximately 3/16" (5 mm) longer than the
thickness of the panel.
Carefully tighten the screws until the gasket is compressed and the plastic bezel face-
plate is touching the panel.
Do not tighten each screw fully before moving on to the next screw. Apply only one or
two turns to each screw in sequence until all are tightened manually as far as they can
be so that the gasket is compressed and the plastic bezel faceplate is touching the panel.
Figure 21. OP6800 Mounted in Panel (rear view)
47