ADE7566ASTZF16 Analog Devices Inc, ADE7566ASTZF16 Datasheet - Page 124

• Manufacturer Part Number: ADE7566ASTZF16
• Description: IC ENERGY METER 1PHASE 64-LQFP
• Manufacturer: Analog Devices Inc

Specifications of ADE7566ASTZF16

• Applications: Energy Measurement
• Core Processor: 8052
• Program Memory Type: FLASH (16 kB)
• Controller Series: ADE75xx
• Ram Size: 512 x 8
• Interface: I²C, SPI, UART
• Number Of I /o: 20
• Voltage - Supply: 3.135 V ~ 3.465 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Ic Function: Single Phase Energy Measurement IC
• Supply Voltage Range: 3.13V To 3.46V, 2.4V To 3.7V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: LQFP
• No. Of Pins: 64
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ADE7566/ADE7569
SPI INTERRUPT AND STATUS FLAGS
The SPI interface has several status flags that indicate the status
of the double buffered receive and transmit registers. Figure 96
shows when the status and interrupt flags are raised. The transmit
interrupt occurs when the transmit shift register is loaded with
the data in the SPI/I
register. If the SPI master is in transmit operating mode, and the
SPI/I
been written with new data by the beginning of the next byte
transfer, the transmit operation stops.
When a new byte of data is received in the SPI/I
Buffer SFR (SPI2CRx, 0x9B) register, the SPI receive interrupt
2
C Transmit Buffer SFR (SPI2CTx, 0x9A) register has not
2
C Transmit Buffer SFR (SPI2CTx, 0x9A)
SPICPHA = 1
SPICPHA = 0
WITH INTMOD = 1
WITH INTMOD = 0
WITH INTMOD = 1
WITH INTMOD = 0
(SPICPOL = 1)
(SPICPOL=0)
SPITx FLAGS
SPITx FLAGS
SPITx FLAGS
SPITx FLAGS
SPIRx AND
SPIRx AND
SPIRx AND
SPIRx AND
2
SCLK
SCLK
SS_b
C Receive
MISO
MOSI
MISO
MOSI
Figure 97. SPI Timing Configurations
Rev. PrA | Page 124 of 136
MSB BIT 6 BIT 5 BIT 4 BIT 3 BIT 2 BIT 1 LSB
MSB BIT 6 BIT 5 BIT 4 BIT 3 BIT 2 BIT 1 LSB
?
?
MSB BIT 6 BIT 5 BIT 4 BIT 3 BIT 2 BIT 1 LSB
MSB BIT 6 BIT 5 BIT 4 BIT 3 BIT 2 BIT 1 LSB
flag is raised. If the data in the SPI/I
(SPI2CRx, 0x9B) register is not read before new data is ready to
be loaded into the SPI/I
an overflow condition has occurred. This overflow condition,
indicated by the SPIRxOF flag, forces the new data to be discarded
or overwritten if the RxOFW bit is set.
TRANSMIT SHIFT REGISTER
TRANSMIT SHIFT REGISTER
Figure 96. SPI Receive and Transmit Interrupt and Status Flags
SPITx (EMPTY)
SPITx
STOPS TRANSFER IF TIMODE = 1
SPITxIRQ = 1
Preliminary Technical Data
2
C Receive Buffer SFR (SPI2CRx, 0x9B),
?
?
2
C Receive Buffer SFR
RECEIVE SHIFT REGISTER
RECEIVE SHIFT REGISTER
SPIRx (FULL)
SPIRx
SPIRxOF = 1
SPIRxIRQ = 1