PIC12F510-I/SN Microchip Technology, PIC12F510-I/SN Datasheet - Page 46

• Manufacturer Part Number: PIC12F510-I/SN
• Description: IC PIC MCU FLASH 1KX14 8SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 12Fr

Specifications of PIC12F510-I/SN

• Program Memory Type: FLASH
• Program Memory Size: 1.5KB (1K x 12)
• Package / Case: 8-SOIC (3.9mm Width)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 8MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Ram Size: 38 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC12F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 38 B
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 1
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164101, DV164120, DM163029
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 3 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162070 - HEADER INTRFC MPLAB ICD2 8/14P
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC12F510/16F506
REGISTER 7-2:
DS41268D-page 44
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Note 1:
C1OUT
R-1
2:
When comparator is turned on, these control bits assert themselves. Otherwise, the other registers have
precedence.
Overrides T0CS bit for TRIS control of RB2.
C1OUT: Comparator Output bit
1 = V
0 = V
C1OUTEN: Comparator Output Enable bit
1 = Output of comparator is NOT placed on the C1OUT pin
0 = Output of comparator is placed in the C1OUT pin
C1POL: Comparator Output Polarity bit
1 = Output of comparator is not inverted
0 = Output of comparator is inverted
C1T0CS: Comparator TMR0 Clock Source bit
1 = TMR0 clock source selected by T0CS control bit
0 = Comparator output used as TMR0 clock source
C1ON: Comparator Enable bit
1 = Comparator is on
0 = Comparator is off
C1NREF: Comparator Negative Reference Select bit
1 = C1IN- pin
0 = 0.6V internal reference
C1PREF: Comparator Positive Reference Select bit
1 = C1IN+ pin
0 = C1IN- pin
C1WU: Comparator Wake-up On Change Enable bit
1 = Wake-up On Comparator Change is disabled
0 = Wake-up On Comparator Change is enabled
C1OUTEN
R/W-1
IN
IN
CM1CON0: COMPARATOR C1 CONTROL REGISTER (PIC16F506)
+ > V
+ < V
IN
IN
-
-
W = Writable bit
‘1’ = Bit is set
C1POL
R/W-1
C1T0CS
R/W-1
(2)
(1), (2)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
(2)
R/W-1
C1ON
(2)
(2)
(2)
C1NREF
R/W-1
© 2007 Microchip Technology Inc.
x = Bit is unknown
C1PREF
R/W-1
C1WU
R/W-1
bit 0