SI100 Applied Motion, SI100 Datasheet - Page 2

• Manufacturer Part Number: SI100
• Description: Stepper Motors STEPPER MOTOR INDEXER
• Manufacturer: Applied Motion

Specifications of SI100

• Dimensions: 203.2 mm

Si-100 Technical Specifications
AC INPUT POWER ...................................... 110 or 220 VAC (switch selectable), 50–60 Hz.
MOTOR RESOLUTION ................................ 16 resolutions. Steps per revolution with 1.8˚ motor: 200, 400,
STEP AND DIRECTION OUTPUTS .............. 2 sourcing outputs (step+ and dir+) and 2 sinking outputs (step–
POWER SUPPLY OUTPUTS ........................ 5 and 24 VDC., 100ma max. The 24 VDC supply is isolated from
SERIAL COMMUNICATION ......................... RS-232 programming port.
STATUS LED'S ............................................ Two color, normal (green), limit (red).
INPUTS ....................................................... 8 inputs, 5–24 VDC, bidirectional, optically isolated.
OUTPUTS ................................................... 3 general purpose, optically isolated outputs for interfacing to
PARAMETER RANGES ............................... Distance: 1 to 16,000,000 steps. Speed: .025 to 50 revolutions per
OPTIONAL OPERATOR INTERFACE (MMI) NEMA 4X rated (splash proof & dust proof). 4 x 20 characters liq-
SYSTEM SPECIFICATIONS:
OVERALL SIZE ........................................... 1.25 x 3.86 x 8 inches. See mechanical outline.
CASE MATERIAL ........................................ Steel, finished with black textured paint and white silk screen.
WEIGHT ...................................................... 2 lbs.
AMBIENT TEMPERATURE .......................... 0˚ to 50˚C (32˚ to 122˚F).
HUMIDITY .................................................. Maximum of 90% non-condensing.
CONNECTORS ............................................ Screw terminal connectors for input power and I/O signals.
DRIVES ....................................................... Indexer for step and direction compatible stepper and brushless
1000, 2000, 5000, 10000, 12800, 18000, 20000, 21600, 25000,
25400, 25600, 36000, 50000, 50800.
and dir–). Step+ and dir+ are 2.5min., 3.4V typ. with a 20na load.
Step– and dir– are 8.5V max., 0.3V typ. with a 20ma load. The
step frequency is 50Hz to 2.54MHz. The step duty cycle is 50%
and the step rate is updated at 12,800Hz.
the internal circuitry. The 5 VDC supply is not. Each supply is pro-
tected by a self resetting fuse.
2 dedicated limit switch inputs.
4 dedicated general purpose inputs (for triggering, sensing & pro-
gram branching).
2 JOG inputs (cw and ccw) can be also used as general purpose
inputs.
other equipment. Can be set to a high or low voltage or pro-
grammed to send a pulse by the Set Output instruction.
second (in any microstep resolution). Acceleration: 1 to 3,000 rev/
sec/sec. Deceleration: 1 to 3,000 rev/sec/sec (set independently
from acceleration). Time Delays: .01 to 300 seconds. Output Pulse
Widths: 2 to 500 milliseconds. Iterations per loop: 1 to 65,535.
uid crystal display (LCD). 20 key membrane keypad. Overall size:
4.9 x 4.9 x 1.42 inches.
DC drives.
831/761-6555 • 800/525-1609 • FAX [phone]
404 Westridge Dr. • Watsonville, CA 95076
www.appliedmotionproducts.com
CONTROLS
MOTOR
209