ATF16V8C-5JC Atmel, ATF16V8C-5JC Datasheet - Page 9

IC PLD 5NS 20PLCC

ATF16V8C-5JC

Manufacturer Part Number
ATF16V8C-5JC
Description
IC PLD 5NS 20PLCC
Manufacturer
Atmel
Datasheet

Specifications of ATF16V8C-5JC

Programmable Type
EE PLD
Number Of Macrocells
8
Voltage - Input
5V
Speed
5ns
Mounting Type
Surface Mount
Package / Case
20-PLCC
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
ATF16V8C5JC

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ATF16V8C-5JC
Manufacturer:
ATM
Quantity:
3 000
Part Number:
ATF16V8C-5JC
Manufacturer:
ATM
Quantity:
3 000
Part Number:
ATF16V8C-5JC
Manufacturer:
ATMEL
Quantity:
1 000
Part Number:
ATF16V8C-5JC
Manufacturer:
Atmel
Quantity:
10 000
0425H–PLD–3/11
16.1
In simple mode, all feedback paths of the output pins are routed via the adjacent pins. In doing so, the two inner most pins
(pins 15 and 16) will not have the feedback option as these pins are always configured as dedicated combinatorial output.
Atmel ATF16V8C registered mode
PAL device emulation/PAL replacement. The registered mode is used if one or more registers are required. Each
macrocell can be configured as either a registered or combinatorial output or I/O, or as an input. For a registered output or
I/O, the output is enabled by the OE pin, and the register is clocked by the CLK pin. Eight product terms are allocated to
the sum term. For a combinatorial output or I/O, the output enable is controlled by a product term, and seven product
terms are allocated to the sum term. When the macrocell is configured as an input, the output enable is permanently
disabled.
Any register usage will make the compiler select this mode. The following registered devices can be emulated using this
mode:
Figure 17.
Notes:
Figure 18.
Notes:
16R8
16R6
16R4
1. Pin 1 controls common CLK for the registered outputs.
2. The development software configures all the architecture control bits and checks for proper pin usage automatically.
1. Pin 1 and Pin 11 are permanently configured as CLK and OE.
2. The development software configures all the architecture control bits and checks for proper pin usage automatically.
Pin 11 controls common OE for the registered outputs.
Pin 1 and Pin 11 are permanently configured as CLK and OE.
Registered configuration for registered mode
Combinatorial configuration for registered mode
16RP8
16RP6
16RP4
(1)(2)
(1)(2)
Atmel ATF16V8C
9

Related parts for ATF16V8C-5JC