EMC1403-3-AIZL-TR SMSC, EMC1403-3-AIZL-TR Datasheet - Page 18
![no-image](/images/manufacturer_photos/0/6/617/smsc_sml.jpg)
EMC1403-3-AIZL-TR
Manufacturer Part Number
EMC1403-3-AIZL-TR
Description
Board Mount Temperature Sensors Triple Temp Sensor Autobeta Comp
Manufacturer
SMSC
Datasheet
1.EMC1403-1-AIZL-TR.pdf
(51 pages)
Specifications of EMC1403-3-AIZL-TR
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Revision 1.37 (01-06-10)
5.1
5.1.1
5.1.2
Anti-parallel
diodes
The EMC1403 and EMC1404 have two modes of operation.
Conversion Rates
The EMC1403 and EMC1404 may be configured for different conversion rates based on the system
requirements. The conversion rate is configured as described in
rate is 4 conversions per second. Other available conversion rates are shown in
Dynamic Averaging
Dynamic averaging causes the EMC1403 and EMC1404 to measure the external diode channels for
an extended time based on the selected conversion rate. This functionality can be disabled for
increased power savings at the lower conversion rates (see
enabled, the device will automatically adjust the sampling and measurement time for the external diode
channels. This allows the device to average 2x or 16x longer than the normal 11 bit operation
(nominally 21ms per channel) while still maintaining the selected conversion rate. The benefits of
dynamic averaging are improved noise rejection due to the longer integration time as well as less
random variation of the temperature measurement.
When enabled, the dynamic averaging applies when a one-shot command is issued. The device will
perform the desired averaging during the one-shot operation according to the selected conversion rate.
When enabled, the dynamic averaging will affect the average supply current based on the chosen
conversion rate as shown in
Thermal
Modes of Operation
diode
CPU
Active (Run) - In this mode of operation, the ADC is converting on all temperature channels at the
programmed conversion rate. The temperature data is updated at the end of every conversion and
the limits are checked. In Active mode, writing to the one-shot register will do nothing.
Standby (Stop) - In this mode of operation, the majority of circuitry is powered down to reduce
supply current. The temperature data is not updated and the limits are not checked. In this mode
of operation, the SMBus is fully active and the part will return requested data. Writing to the one-
shot register will enable the device to update all temperature channels. Once all the channels are
updated, the device will return to the Standby mode.
Figure 5.2 System Diagram for EMC1404
DP2
DN2
DN1
EMC1404
DP1
Internal
Diode
Table 5.1
DATASHEET
for EMC1403.
THERM
SMCLK
SMDATA
ALERT
18
Interface
Power Control
SMBus
Host
1°C Temperature Sensor with Beta Compensation
Section
Section
6.4). When dynamic averaging is
6.5. The default conversion
SMSC EMC1403 / EMC1404
Table
6.6.
Datasheet