MS621F Seiko Instruments, MS621F Datasheet - Page 22

• Manufacturer Part Number: MS621F
• Description: Coin Cell Battery 3.1 Volt 5.5mAH Bare Cell
• Manufacturer: Seiko Instruments
• Type: Cellular Phone, Cordless Phone Batteriesr

Specifications of MS621F

• Chemistry: Lithium
• Battery Cell Size: Coin Cell
• Output Voltage: 3 V
• Battery Capacity: 5.5 mAh
• Termination Style: Solder Pin
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Micro-Energy Division capacitors (XH-HG) contain fl ammable organic solvents. For your safety,
please follow the following prohibitions.
For using SII Silver Oxide batteries, please follow the following prohibitions.
22
• Do not charge by high current or high voltage.
• Do not reverse placement of (+) and (-)
• Do not solder directly to the capacitor
• Keep capacitors out of children’s reach.
•
• Do not short.
• Keep batteries out of children’s reach.
• Do not reverse placement of (+) and (-)
• Do not solder directly to the battery
• Do not use new and used batteries together. Do
• Do not charge.
• Do not use nor leave the batteries in direct sun-
• Keep batteries away from direct sunlight, high
• Avoid letting battery contact with water.
• If leaked liquid gets in the eyes, wash them with
• Do not use nor leave the capacitors in direct
• Do not use new and used capacitors together.
IMPORTANT
1. The information herein is subject to change without notice.
2. Neither reproduction, duplication nor unauthorized use of this catalog in
3. The colors of the products reproduced herein (“Products”) may be differ-
4. Circuits and respective application methods described herein are for ref-
It may cause catching fi re, heat generation, leakage or bursting.
It may cause catching fi re, heat generation, leakage or bursting.
Doing so may generate gas inside the capacitor, resulting
in swelling, catching fi re, heat generation or bursting.
SII capacitors have polarity. If the (+) and (-) side of the ca-
pacitor is reverse inserted, it may cause a short-circuiting
or over discharge of the capacitor on some equipment and
it may induce overheating, explosion or fi re.
If soldering is performed directly to the capacitor, the ca-
pacitor is heated up, consequently cause leakage, explo-
sion or fi re due to overheating from internal short-circuiting.
If leaked liquid is ingested or a capacitor is swal-
lowed, consult a physician immediately.
Do not heat, disassemble nor dispose of in fi re
Doing so damages the insulation materials and may cause
catching fi re, heat generation, leakage or bursting.
If the (+) and (-) come into contact with metal materials,
short-circuiting occurs. As a result, catching fi re, heat gen-
eration, leakage or bursting may occur.
If leaked liquid is ingested or a battery is swallowed, con-
sult a physician immediately.
not use different types of batteries together.
light nor in high-temperature areas.
temperature and humidity.
clean water and consult a physician immediately.
sunlight nor in high-temperature areas.
Do not use different types of capacitors together.
whole or part is allowed without the prior written approval of Seiko Instru-
ments Inc.
ent from the actual colors. Check colors on actual products before using
the Products.
erence only. Seiko Instruments Inc. shall not be liable for any damages
or losses resulting from any claim by third parties that any Products or ap-
plication methods described herein infringe any right intellectual property
Precautions for Your Safety
WARNING!
WARNING!
CAUTION!
CAUTION!
5. When Products include Strategic Products (or Services) stipulated in the
6. The Products are designed for consumer equipment and cannot be used
• Do not heat, disassemble nor dispose of in fi re
• Do not discharge by force
• In case of leakage or a strange smell, keep away
• If you connect two or more capacitors in series
• Keep capacitors away from direct sunlight, high
• If leaked liquid, alkaline, get in the eyes, do not
• If leaked liquid, alkaline, stick upon wears, for
• Make sure to insert batteries without having (+) and
• Read the equipment instruction manual and pre-
• Remove batteries from the equipment, if finish
• In case of disposal, insulate between (+) and (-)
Doing so damages the insulation materials and may cause
catching fi re, heat generation, leakage or bursting.
If the capacitor is discharged by direct connection to an ex-
ternal power supply etc., voltage of the capacitor will decline
lower than 0 volts (electrical reversal) and will cause the
capacitor case to expand, overheat, leak, explode or burn.
or parallel, please consult us in advance.
It may cause bursting or catching fire due unbalanced
load or voltage.
temperature and humidity.
It may cause heat generation or performance deterioration.
(-) come in contact with metal parts of equipment.
cautions carefully before use. Some usage or
types of equipment do not suit the specifi cations
or performance of these batteries.
using. Do not leave batteries connecting with
equipment after using.
of battery by an insulating material.
from fi re to prevent ignition of any leaked electrolyte.
right. All intellectual property rights with respect to the Products belong
exclusively to Seiko Instruments Inc.
Seiko Instruments Inc. does not grant users of the Products any right or
license to the Products hereunder.
Foreign Exchange and Trade Control Law, they shall not be exported
without permission of governmental authorities.
as part of any device or equipment which infl uences the human body or
requires a signifi cantly high reliability, such as physical exercise equip-
ment, medical equipment, disaster prevention equipment, gas related
equipment, vehicles, aircraft and equipment mounted on vehicles.
rub them, wash them with clean water and con-
sult a physician immediately.
protecting irritation, wash them with clean water
immediately.
Micro Battery 2007-2008