TS39100CP25 Taiwan Semiconductor, TS39100CP25 Datasheet - Page 6

• Manufacturer Part Number: TS39100CP25
• Description: Low Dropout (LDO) Regulators 1.0A Ultra LDO Positive
• Manufacturer: Taiwan Semiconductor

Specifications of TS39100CP25

• Number Of Outputs: 1
• Polarity: Positive
• Input Voltage Max: 16 V
• Output Voltage: 2.5 V
• Output Type: Fixed
• Dropout Voltage (max): 0.25 V at 100 mA
• Output Current: 1 A
• Line Regulation: 0.5 %
• Load Regulation: 1 %
• Voltage Regulation Accuracy: 2 %
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Package / Case: TO-252
• Minimum Operating Temperature: - 40 C
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: RO

Application Information (Continue)
Enable Input
TS39101/2/3/4/5 versions feature an active-high enable (EN) input that allows ON/OFF control of the regulator.
Current drain reduces to “zero” when the device is shutdown, with only micro-amperes of leakage current. The EN
input has TTL/CMOS compatible thresholds for simple interfacing with logic interfacing. EN may be directly tied to V
and pulled up to the maximum supply voltage.
Error Flag
TS39101/3 versions feature an Error Flag, which looks at the output voltage and signals an error condition when this
voltage drops 5% below its expected value. The error flag is an open-collector output that pulls low under fault
conditions. It may sink 10mA. Low output voltage signifies a number of possible problems, including an over-current
fault (the device is in current limit) or low input voltage. The flag output is inoperative during over temperature
shutdown conditions. A pull-up resistor from error flag to either V
information regarding the minimum and maximum values of pull-up resistance, refer the graph as follow:
Power SOP-8 Thermal Characteristic
TS39101/2/4 series’ performance is its power SOP-8 package featuring half the thermal resistance of a standard SOP-
8 package. Lower thermal resistance means more output current or higher input voltage for a standard SOP-8
package. Lower thermal resistance means more output current or higher input voltage for a given package size.
Lower thermal resistance is achieved by connect the four ground pins with the die attached pad to create a single
piece electrical and thermal conductor. This concept have been used by MOSFET production for years, proving very
reliable and cost effective for the user. As above thermal resistance figure. Thermal resistance consists of two main
elements, Θ
resistance, Θ
device. Typically, the power SOP-8 have a Θ
SOP-8 which is typically 75
significantly reduces the case to sink and sink to ambient thermal resistance.
JC
JA
(junction to case) and Θ
(junction to ambient) is the limiting factor in calculating the maximum power dissipation capability of the
o
C/W. Θ
CA
is reduced because pin 5~8 can be soldered directly to a ground plane which
CA
(case to ambient). Using the power SOP-8 reduces Θ
JC
of 20
o
1A Ultra Low Dropout Voltage Regulator
C/W dramatically , this is significantly lower than the standard
6/13
iN
or V
OUT
Thermal Resistance
TS39100/1/2/3/4/5
is required for proper operation. For
with Multi-Function
CA
, the total thermal
Version: B07
iN