10-9002A GC Electronics, 10-9002A Datasheet - Page 3

• Manufacturer Part Number: 10-9002A
• Description: RED GLPT INSULATING VARNISH, BOTTLE WITH BRUSH, 2FL.OZ.
• Manufacturer: GC Electronics
• Type: Insulatingr

Specifications of 10-9002A

• Dispensing Method: Bottle
• Primary Type: Coating
• Weight: 2 oz
• Lead Free Status / Rohs Status: RoHS Compliant part Hazardous Materials

GC Electronics
Boiling Point:
Evaporation Rate (Butyl Acetate=1)
Weight Per Gallon (25 C):
Vapor Density (Air=1):
Volatile by Weight:
Volatile by Volume:
Specific Gravity:
VOC:
Flammability Classification:
Flash Point:
Lower Explosive Limit (LEL):
Upper Explosive Limit (UEL):
Extinguishing Media:
Unusual Fire and Explosion Hazards:
Special Fire Fighting Procedures:
Primary Route(s) of Entry:
Exposure Limit:
Acute Effects of Overexposure:
Inhalation:
Skin Contact:
Part Number(s): 10-9002, 10-9002-1G, 10-9008
Section 4 – Fire and Explosion Hazard Data
> 200 F
No data
9.054 lbs/gl
No data
50.0%
63.0%
1.09
For compliance with VOC regulations, the VOC content must be calculated on
an “as applied” basis. The volatile by weight and volatile by volume data on
this MSDS should not be used to determine compliance with VOC regulations.
OSHA: Flammable Liquid – Class IC
78 F estimate
No data
No data
Carbon dioxide, dry chemical, foam, and vaporizing liquid type extinguishing
agents have all been found suitable for use on flammable liquid fires of
moderate size. Water spray (fog) is particularly effective on fires in flammable
liquids and volatile solids having flash points above 100 F; but with liquids
having flash points above 212 F, frothing may occur.
A straight stream of water will spread fire. A vapor accumulation will flash
and/or explode if ignited. Containers may burst explosively if overheated in
fire. Cool containers with water spray or fog. Empty containers may also
present a fire and/or explosion hazard due to residual vapors.
Remove all ignition sources. Keep personnel not involved with emergency
activities away and upwind of fire. Water spray may be ineffective and may
cause fire to spread. If water is used, fog nozzles are preferable. Water may
be used to cool closed containers in order to prevent pressure build-up which
may result in an explosion. Use self-contained breathing apparatus and
protective clothing.
Refer to Section 2 for complete PEL/TLV data.
Breathing high concentrations of vapors or mist may cause upper respiratory
tract irritation and may be associated with cardiac irregularities. May affect the
brain or nervous system, causing dizziness, headache, or nausea.
Prolonged or repeated contact can cause moderate irritation defatting, and
dermatitis.
Section 5 – Health Hazard Data
Inhalation
Section 3 – Physical Data
Skin Contact
Product Name: Red Insulating Varnish
__ Ingestion
MSDS Number: 129
Page 2 of 6