DP-270-BLACK 3M, DP-270-BLACK Datasheet - Page 7

• Manufacturer Part Number: DP-270-BLACK
• Description: Adhesive; Epoxy Potting Compound; Black
• Manufacturer: 3M
• Type: Potting Compoundr

Specifications of DP-270-BLACK

• Chemical Component: Carbon Black/Epoxy Resin/Hydrocarbon Resin
• Chemical System: Epoxy Potting Compound
• Color: Black
• Dispensing Method: Syringe
• Primary Type: Adhesive
• Special Features: Non-Corrosive
• Time, Drying: Air Dry for 15 minutes, Force Dry for 10 minutes @ 66 °C +⁄- 5 °C (Aluminum Surface), If 3M™ Scotch-Weld™ Structural Adhesive Primer EC1945 B⁄A is Used, Apply a Thin Coating (0.5 mils) on the Metal Surfaces to be Bonded, Air Dry for 10 minutes, then Cure
• Time, Setting: 15 min. (Aluminum), 10 min. (Steel)
• Weight: 1.7 fl.oz.
• Lead Free Status / Rohs Status: RoHS Compliant part Hazardous Materials

8.2.1 Eye/Face Protection
The following eye protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.
8.2.2 Skin Protection
Wear appropriate gloves, such as Nomex, when handling this material to prevent thermal burns. Avoid skin contact. Avoid skin
contact with hot material. Gloves are not required.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Polyethylene/Ethylene Vinyl Alcohol.
8.2.3 Respiratory Protection
Avoid breathing of dust created by cutting, sanding, grinding or machining.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half mask R95 particulate respirator, Half mask or full facepiece air-purifying respirator with N100 particulate
filters, Half facepiece or fullface air-purifying respirator with P100 particulate filters, Half facepiece or fullface air-purifying
respirator with P95 particulate filters, Half facepiece or fullface air-purifying respirator with N95 particulate filters. Consult the
current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Wash hands after handling
and before eating.
8.3 EXPOSURE GUIDELINES
SOURCE OF EXPOSURE LIMIT DATA:
_________________________________________________________________________________________________
CARBON BLACK
CARBON BLACK
CARBON BLACK
MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Potting Compound/Adhesive DP-270, Black (Part B)
Ingredient
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
Odor, Color, Grade:
General Physical Form:
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL
Boiling point
Vapor Density
Vapor Pressure
Specific Gravity
ACGIH
CMRG
OSHA
Authority
TWA
TWA
TWA
Type
black, very mild odor.
Liquid
No Data Available
>=370.00 ºF [Test Method: Cleveland Open Cup]
Not Applicable
Not Applicable
> 300 ºF
Not Applicable
<=27 psia [@ 131 ºF]
1.150 [Ref Std: WATER=1]
3.5 mg/m3
0.5 mg/m3
3.5 mg/m3
Limit
Table A4
Table Z-1
Additional Information
Page 4 of 7