DP-100-CLEAR 3M, DP-100-CLEAR Datasheet - Page 7

• Manufacturer Part Number: DP-100-CLEAR
• Description: Adhesive; Epoxy; Clear
• Manufacturer: 3M

Specifications of DP-100-CLEAR

• Chemical Component: Epoxy Resin
• Chemical System: Epoxy
• Color: Clear
• Dispensing Method: Syringe
• Primary Type: Adhesive
• Time, Drying: Air Dry for 15 minutes, Force Dry for 10 minutes @ 66 °C +⁄- 5 °C (Aluminum Surface), If 3M™ Scotch-Weld™ Structural Primer 1945 B⁄A is Used, Apply a Thin Coating (0.5 mils) on the Metal Surfaces to be Bonded, Air Dry for 10 minutes, then Cure for 30 minu
• Time, Setting: 15 min. (Aluminum), 10 min. (Steel)
• Weight: 1.7 Oz.
• Lead Free Status / Rohs Status: RoHS Compliant part

8.2.2 Skin Protection
Avoid skin contact. Do not cure up a mass of combined material larger than 50 grams to prevent the possibility of exotherm.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Polyethylene/Ethylene Vinyl Alcohol.
8.2.3 Respiratory Protection
Avoid breathing of dust created by cutting, sanding, grinding or machining.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half facepiece or fullface air-purifying respirator with P100 particulate filters, Half facepiece or fullface air-
purifying respirator with P95 particulate filters, Half facepiece or fullface air-purifying respirator with N95 particulate filters.
Consult the current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
None Established
Stability: Stable.
Materials and Conditions to Avoid: Strong acids; Strong oxidizing agents; Heat is generated during cure. Do not cure a mass larger
_________________________________________________________________________________________________
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-100 Clear (Part B)
SECTION 10: STABILITY AND REACTIVITY
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Specific Physical Form:
Odor, Color, Grade:
General Physical Form:
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL
Boiling point
Density
Vapor Density
Vapor Pressure
Specific Gravity
pH
Melting point
Solubility in Water
Evaporation rate
Volatile Organic Compounds
VOC Less H2O & Exempt Solvents
Viscosity
data]
Viscous
Liquid
249 ºC [Test Method: Pensky-Martens Closed Cup]
>=249 ºC
1.17 g/ml
<=0.03 mmHg [@ 70 ºC]
1.17
Nil
0 g/l
0 g/l
light straw colored, epoxy odor
No Data Available
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
10000 - 30000 centipoise [@ 73.4000000000 ºF] [Details: MITS
Page
4 of 7