ES1035 Chemtronics, ES1035 Datasheet - Page 3

• Manufacturer Part Number: ES1035
• Description: Chemical, Flux Remover, Rosin, 10 oz, Aerosol Can
• Manufacturer: Chemtronics
• Type: Flux Removerr

Specifications of ES1035

• Chemical Component: 1, 1-Difluoroethane/Carbon Dioxide/Denatured Alcohol/Isohexane
• Dispensing Method: Aerosol
• Primary Type: Cleaner
• Special Features: Non-Corrosive
• Weight: 10 Oz.
• Lead Free Status / Rohs Status: RoHS Compliant part Hazardous Materials

ITW CHEMTRONICS
SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Code: ES1035, ES1035B, ES1035CB, ES835B, ES1035C, ES1035BC, ES1035CBC
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name
Isohexane, a mixture of:
Denatured alcohol a mixture of:
1,1-difluoroethane
Carbon dioxide
SECTION 3: HAZARD IDENTIFICATION
Emergency Overview: Clear, colorless liquid with mild hydrocarbon solvent. This product is extremely flammable. Liquid may irritate eyes and skin under repeated or
prolonged exposure. Breathing high concentrations of product may produce drowsiness and a headache.
Potential Health Effects:
Eyes: Liquid, aerosols and vapors of this product are irritating and can cause pain, tearing, reddening and swelling accompanied by a stinging sensation.
Skin: Contact causes skin irritation.
Ingestion: Harmful if swallowed. Irritating to the mouth, throat and stomach. May cause vomiting. Inhalation: Harmful if inhaled. High concentrations in immediate
area can displace oxygen and cause dizziness, unconsciousness and even death with longer exposure. Keep people away from such vapors without self-contained
breathing apparatus. Pre-Existing Medical Conditions Aggravated by Exposure: Heart, lung, skin, eye.
SECTION 4: FIRST AID MEASURES
Eyes:
and tested by medical personnel if irritation develops or persists.
Skin: Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation develops or persists. Wash clothing separately before reuse.
Ingestion: If swallowed, do not induce vomiting. Keep head below knees to minimize chance of aspirating material into the lungs. Never give anything by mouth to an
unconscious person. Get medical attention immediately.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
SECTION 5: FIRE FIGHTING MEASURES
Flash Point: -20 F (-29C) (isohexane)
Extinguishing Media: Use alcohol foam, carbon dioxide or water spray when fighting fires involving this material. Fire Fighting Instructions: As in any fire, wear self-
contained breathing apparatus (pressure demand, MSHA/NIOSH approved or equivalent) and full protective gear.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Large Spills: Shut off leak if possible and safe to do so. Wear self-contained breathing apparatus and appropriate personal protective equipment. Absorb spill with inert
material (i.e. dry sand or earth), then place in a chemical waste container for proper disposal. Do not flush to sewer. Avoid runoff into storm sewers and ditches that
lead to waterways. Small Spills: Absorb spill with inert material (i.e. dry sand or earth), then place in a chemical waste container for proper disposal.
SECTION 7: HANDLING AND STORAGE
Avoid prolonged or repeated contact with skin, eyes or clothing. Wash hands before eating. Use with adequate ventilation. Avoid breathing product vapor. Do not
reuse this container. Store in a cool dry place, away from heat, sparks or flames. Keep container tightly closed when not in use. Do not store in direct sunlight.
KEEP OUT OF REACH OF CHILDREN.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines:
CHEMICAL NAME
2-methylpentane
3-methylpentane
2,3-Dimethylbutane
2,2-Dimethylbutane
n-Hexane
Ethanol
Isopropanol
Ethyl acetate
1,1-difluoroethane
Work/Hygienic Practices: Good general ventilation should be sufficient to control airborne levels. Local exhaust ventilation may be necessary to control any air
contaminants to within their TLVs during the use of this product. If vapor concentration exceeds TLV, use NIOSH approved organic vapor cartridge respirator. Wear
safety glasses with side shields (or goggles) and rubber or other chemically resistant gloves when handling this material.
Product Identification
2-methylpentane
3-methylpentane
2,3-Dimethylbutane
2,2-Dimethylbutane
n-hexane
Ethanol
Isopropanol
Ethyl acetate
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Have eyes examined
Product Information: 800-TECH-401
®
LEL/UEL: 1.2/7.7 (% by volume in air)
(Formerly CFC Free Flux-Off 2000)
FLUX-OFF® ROSIN
NA
CAS No.
67-63-0
75-37-6
ACGIH TLV
200ppm
107-83-5
96-14-0
79-29-8
75-83-2
110-54-3
64-17-5
141-78-6
124-38-9
500 ppm
500 ppm
500 ppm
500 ppm
50 ppm
400 ppm
Page 1 of 2
1000 ppm
OSHA PEL
NA
NA
NA
NA
500 ppm
400ppm
400 ppm
NA
1000 ppm
Wt. % Range
1.0-46.0
1.0-25.0
1.0-25.0
1.0-25.0
0.1-3.0
1.0-25.0
1.0-20.0
0.1-10.0
5.0-25.0
1.0-5.0
1,000 ppm (DuPont)
MSDS #0302
STEL / OTHER
1000 ppm
1000 ppm
1000 ppm
1000 ppm
NA
400ppm
NA
NA