DP-270-CLEAR 3M, DP-270-CLEAR Datasheet - Page 6

• Manufacturer Part Number: DP-270-CLEAR
• Description: Adhesive; Epoxy Potting Compound; Clear
• Manufacturer: 3M
• Type: Potting Compoundr

Specifications of DP-270-CLEAR

• Chemical Component: Epoxy Resin/Hydrocarbon Resin
• Chemical System: Epoxy Potting Compound
• Color: Clear
• Dispensing Method: Syringe
• Primary Type: Adhesive
• Special Features: Non-Corrosive
• Time, Drying: Air Dry for 15 minutes, Force Dry for 10 minutes @ 66 °C +⁄- 5 °C (Aluminum Surface), If 3M™ Scotch-Weld™ Structural Adhesive Primer EC1945 B⁄A is Used, Apply a Thin Coating (0.5 mils) on the Metal Surfaces to be Bonded, Air Dry for 10 minutes, then Cure
• Time, Setting: 15 min. (Aluminum), 10 min. (Steel)
• Weight: 1.7 fl.oz.

Material Safety Data Sheet
Copyright, 2008, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
Product Use:
3.1 EMERGENCY OVERVIEW
Odor, Color, Grade: clear, very mild odor.
General Physical Form: Liquid
Immediate health, physical, and environmental hazards:
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.
_________________________________________________________________________________________________
MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Potting Compound/Adhesive DP-270, Clear (Part B)
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
SECTION 2: INGREDIENTS
SECTION 3: HAZARDS IDENTIFICATION
Ingredient
EPOXY RESIN
HYDROCARBON RESIN
MANUFACTURER: 3M
PRODUCT NAME: 3M(TM) Scotch-Weld(TM) Epoxy Potting Compound/Adhesive DP-270, Clear (Part B)
Document Group: 11-2356-1
Specific Use:
Intended Use:
DIVISION: Industrial Adhesives and Tapes Division
part B of 2 part adhesive
Industrial use
May cause allergic skin reaction.
C.A.S. No.
25068-38-6
9003-53-6
% by Wt
93 - 97
3 - 7
Page 1 of 8