DP-100NS-TRANSLUSCENT 3M, DP-100NS-TRANSLUSCENT Datasheet - Page 4

• Manufacturer Part Number: DP-100NS-TRANSLUSCENT
• Description: Adhesive; Epoxy; Translucent
• Manufacturer: 3M

Specifications of DP-100NS-TRANSLUSCENT

• Chemical Component: Amorphous Silica/Epoxy Resin
• Chemical System: Epoxy
• Color: Translucent
• Dispensing Method: Syringe
• Primary Type: Adhesive
• Time, Drying: Air Dry for 15 minutes, Force Dry for 10 minutes @ 66 °C +⁄- 5 °C (Aluminum Surface), If 3M™ Scotch-Weld™ Structural Primer 1945 B⁄A is Used, Apply a Thin Coating (0.5 mils) on the Metal Surfaces to be Bonded, Air Dry for 10 minutes, then Cure for 30 minu
• Time, Setting: 15 min. (Aluminum), 10 min. (Steel)
• Weight: 1.7 Oz.
• Lead Free Status / Rohs Status: RoHS Compliant part

Limitation of Remedies
and Liability
Scotch-Weld
Epoxy Adhesives
DP-100 Clear • DP-100 NS Translucent
Storage and Shelf Life
Precautionary
Information
For Additional
Information
Important Notice
3
Engineered Adhesives Division
TM
Storage: Store products at 60-80°F (16-27°C) for maximum storage life. Rotate on
Shelf Life: When stored as recommended in original unopened container, this
If the
REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE
3
consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence,
warranty, or strict liability.
To request additional product information or to arrange for sales assistance, call toll free 1-800-362-3550
or visit www.3M.com/adhesives. Address correspondence to:
Center, Building 220-7E-01, St. Paul, MN 55144-1000. Our fax number is 651-733-9175. In Canada,
phone: [phone]. In Puerto Rico, phone: [phone]. In Mexico, phone: [phone].
3
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is
responsible for determining whether the
method of application. Please remember that many factors can affect the use and performance of a
product in a particular application. The materials to be bonded with the product, the surface preparation
of those materials, the product selected for use, the conditions in which the product is used, and the time
and environmental conditions in which the product is expected to perform are among the many factors
that can affect the use and performance of a
use and performance of a
control, it is essential that the user evaluate the
purpose and suitable for the user’s method of application.
This Engineered Adhesives Division product was manufactured under a 3M quality system registered to ISO 9002 standards.
Refer to Product Label and Material Safety Data Sheet for health and safety information before using this
product. For additional health and safety information, call 1-800-364-3577 or [phone].
M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or
M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
3
M product is proved to be defective, THE EXCLUSIVE REMEDY, AT
“first in-first out” basis.
product has a shelf life of 15 months.
3
M product, some of which are uniquely within the user’s knowledge and
- 8 -
3
M product is fit for a particular purpose and suitable for user’s
3
M product. Given the variety of factors that can affect the
ISO 9002
3
M product to determine whether it is fit for a particular
3
M Engineered Adhesives Division,
3
M’S OPTION, SHALL BE TO
3
M PRODUCT.
3
3
M
M