ZS-27-A SMC Corporation, ZS-27-A Datasheet
ZS-27-A
Specifications of ZS-27-A
Related parts for ZS-27-A
ZS-27-A Summary of contents
Page 1
... N7L ø1/4" One-touch fitting Option Part No. When optional parts are required separately, use the following part numbers to place an order. Option Part no. Lead wire with connector ZS-27-A Bracket ZS-27-B Panel mount adapter ZS-27-C Panel mount adater + Front protective cover ZS-27-D 16-2-4 ZSE30/ISE30 ...
Page 2
... With lead wire 81 g with connector (2 m) Weight Without lead wire 43 g with connector High Precision, Specifications ZSE30 (Vacuum/Low pressure) Rated pressure range –100.0 to 100.0 kPa Regulating pressure range –101.0 to 101.0 kPa Proof pressure Min. regulating unit Fluid Power supply voltage ...
Page 3
... If the SET button is pressed while the left-most digit is blinking, the right-most digit will now blink. 4. Press and hold the SET button for 1 second or longer to return to the set value display mode. ZSE30/ISE30 is still displayed, press both the DOWN buttons simultaneously to return to the PRESSURE ...
Page 4
... PRESSURE OUT This function eliminates slight differences in the output values and allows uniformity in the numbers displayed. Displayed values of the pressure sensor can be calibrated to within ±5% for Series ISE and ±2.5% for Series ZSE. ±5% R.D. (±2.5% R.D Applied pressure Note) When the display calibration function is used, the regulating pressure value may change ± ...
Page 5
... Maximum 80 mA supply. Turn the power supply back on. If the power should not come back on, please contact SMC for an inspection. ZSE30/ISE30 LCD display Displays the current pressure condition, setting mode conditions, selected display unit, and error codes. A display color type can be selected from either a ...