SYJ314-5MZ-M5 SMC Corporation, SYJ314-5MZ-M5 Datasheet - Page 55

• Manufacturer Part Number: SYJ314-5MZ-M5
• Description: Solenoid Valve; 3 port; normally closed; base mt; 24VDC; M plug conn w/.3 lead
• Manufacturer: SMC Corporation
• Type: Direct Operatedr

Specifications of SYJ314-5MZ-M5

• Brand/series: SY Series
• Configuration: 2-Position Single
• Number Of Ports: 3
• Primary Type: Solenoid Valve
• Voltage, Coil: 24 VDC

1. Attaching and detaching connectors
3. Attaching and detaching sockets with lead
2. Crimping of lead wires and sockets
• To attach a connector, hold the lever and connector unit
• To detach a connector, remove the pawl from the groove by
wires
• Attaching
Insert the sockets into the square holes of the connector (+, –
indication), and continue to push the sockets all the way in
until they lock by hooking into the seats in the connector.
(When they are pushed in, their hooks open and they are
locked automatically.) Then confirm that they are locked by
pulling lightly on the lead wires.
• Detaching
To detach a socket from a connector, pull out the lead wire
while pressing the socket’s hook with a stick having a thin tip
(approx. 1 mm). If the socket will be used again, first spread
the hook outward.
Strip 3.2 to 3.7 mm at the end of the lead wires, insert the
ends of the core wires evenly into the sockets, and then crimp
with a crimping tool. When this is done, take care that the
coverings of the lead wires do not enter the core wire crimping
area.
Use an exclusive crimping tool for crimping.
(Please contact SMC for special crimping tools.)
between your fingers and insert straight onto the pins of the
solenoid valve so that the lever’s pawl is pushed into the
groove and locks.
pushing the lever downward with your thumb, and pull the
connector straight out.
Socket
Caution
Core wire
crimping area
Socket
Hook
How to Use Plug Connector
Hook
Series
Specific Product Precautions 2
Be sure to read before handling.
Cover
Groove
Crimping area
Pin
Core wire
Connector
Insulation
Cover
SYJ300/500/700
Lead wire
Groove
Pin
Hook
Lever
DC
0.2 to 0.33 mm
Max. cover diameter:
Polarity display
Connector
Lead wire
Socket
Lead wire
2
ø
1.7 mm
How to Order
Include the connector assembly part
number together with the part number for
the plug connector’s solenoid valve
without connector.
EX.) In the case of 2000 mm of lead wire
For other voltages of AC:
For DC
SYJ312-5LO-M3
SY100-30-4A-20
Standard length is 300 mm, but the following lengths are also
available.
How to Order Connector Assembly
(with connector and 2 of sockets only)
Without lead wire:
Caution
For 100 VAC:
For 200 VAC:
Plug Connector Lead Wire Length
For DC:
SY100 30 4A
SY100 30 1A
SY100 30 2A
SY100 30 3A
SY100 30 A
For AC
SYJ312-1LO-M3
SY100-30-1A-20
Nil
Lead wire length
10
15
20
25
30
50
6
1000 mm
1500 mm
2000 mm
2500 mm
3000 mm
5000 mm
300 mm
600 mm
4-4-57
V100
SY
SYJ
VK
VZ
VT
VP
VG
VP
S070
VQ
VKF
VQZ
VZ
VS
VFN