AR25-N02BG-Z SMC Corporation, AR25-N02BG-Z Datasheet - Page 4
![no-image](/images/no-image-200.jpg)
AR25-N02BG-Z
Manufacturer Part Number
AR25-N02BG-Z
Description
AIR REGULATOR, 1/4NPT PORT, BRACKET, GAUGE, PSI, F
Manufacturer
SMC Corporation
Datasheet
1.AR25-N02BG-Z.pdf
(19 pages)
Series
Series
Option / Part No.
Note 1) Assembly of a bracket and set nuts
Note 2) Assembly of a bracket and 2 mounting screws
Note 3) Please consult with SMC regarding the set nuts for the AR50(K) and AR60(K).
Note 4) in part numbers for a round pressure gauge indicates a type of connection thread. No indication is necessary for R; however, indicate N for NPT. Please contact SMC
Note 5) Pressure gauge for general purpose
Note 6) Including one O-ring and 2 mounting screws. [
Note 7) Lead wire with connector (2 m), adaptor, lock pin, O-ring (1 pc.) , mounting screw (2 pcs.) are attached. [
Also, regarding how to order the digital switch, please refer to page 73.
1. Residual pressure disposal (outlet pressure removal) is not
1. When using the regulator with backflow mechanism between a
43
Option
Bracket assembly
Set nut
Press-
ure
gauge
Digital
pressure
switch
Be sure to read this before handling. Refer to “Precautions for Handling Pneumatic Devices” (M-03-E3A) for Safety Instruc-
tions and F.R.L. Unit Precautions.
possible for the AR20 to 60 even though the inlet pressure is
exhausted. When the residual pressure disposal is performed,
use the regulator with a backflow mechanism (the AR20K to
AR60K).
solenoid valve and an actuator, check the pressure gauge
periodically. Sudden pressure fluctuations may shorten the
durability of the pressure gauge. A digital pressure gauge is
recommended for such situation or as deemed necessary.
Warning
Warning
regarding the connection thread NPT and pressure gauge supply for PSI unit specifications.
Round
type
Square
embedded
type
Note 7)
Note 4)
Note 6)
AR10
AR20K
NPN output: Wiring bottom entry
PNP output: Wiring bottom entry
0.02 to 0.2 MPa set
0.02 to 0.2 MPa set
NPN output: Wiring top entry
PNP output: Wiring top entry
Standard
Standard
Note 1)
Model
Maintenance
Selection
to
G27-10-R1
AR10P-260S
AR10P-270AS
G27-10-R1
AR10
to
—
—
—
AR60
Note 5)
Specific Product Precautions
AR60K
]: Pressure gauge cover only
AR20P-260S
AR20P-270AS
AR20(K)
G36-10-01
AR25P-270AS
G36-2-01
AR25P-260S
AR25(K)
GC3-10AS [GC3P-010AS (Pressure gauge cover only)]
GC3-2AS [GC3P-010AS (Pressure gauge cover only)]
ISE35-N-25-MLA [ISE35-N-25-M (Switch body only)]
ISE35-R-25-MLA [ISE35-R-25-M (Switch body only)]
ISE35-N-65-MLA [ISE35-N-65-M (Switch body only)]
ISE35-R-65-MLA [ISE35-R-65-M (Switch body only)]
1. Set the regulator while verifying the displayed values of the
2. The pressure gauge included with regulators for 0.02 to 0.2
3. Do not use tools on the pressure regulator knob as this may
1. Be sure to unlock the knob before adjusting the pressure and
1. A knob cover is available to prevent careless operation of the
AR30P-260S
AR30P-270AS
AR30(K)
• Pull the pressure regulator knob to unlock. (You can visually
• Push the pressure regulator knob to lock. When the knob is
inlet and outlet pressure gauges. Turning the regulator knob
excessively can cause damage to the internal parts.
MPa setting is for up to 0.2 MPa use only (except for the
AR10). Exceeding 0.2 MPa of pressure can damage the gauge.
cause damage. It must be operated manually.
lock it after setting the pressure. Failure to follow this proce-
dure can cause damage to the knob and the outlet pressure
may fluctuate.
knob. Refer to “Features 1” for details.
verify this with the “orange mark” that appears in the gap.)
not easily locked, turn it left and right a little and then push it
(when the knob is locked, the “orange mark”, i.e., the gap will
disappear).
Warning
Caution
]: Switch body only
AR40(K)
Mounting and Adjustment
AR40P-270AS
AR40P-260S
AR40(K)-06
G46-10-02
G46-2-02
Orange mark
AR50(K)
—
AR50P-270AS
Note 3)
AR60(K)
—
Note 2)
Note 3)