DP-190-TRANSLUCENT 3M, DP-190-TRANSLUCENT Datasheet - Page 6

• Manufacturer Part Number: DP-190-TRANSLUCENT
• Description: Scotch-Weld Two-Part Epoxy 1.7 fl oz Translucent
• Manufacturer: 3M

Specifications of DP-190-TRANSLUCENT

• Chemical Component: Epoxy Resin
• Dispensing Method: Tube
• Primary Type: Adhesive
• Special Features: High Strength
• Weight: 1.7 fl.oz.
• Lead Free Status / Rohs Status: RoHS Compliant part

8.2.1 Eye/Face Protection
Avoid eye contact with vapors, mists, or spray.
The following eye protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.
8.2.2 Skin Protection
Avoid skin contact. Avoid skin contact with hot material. Wear appropriate gloves, such as Nomex, when handling this material to
prevent thermal burns.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Butyl Rubber, Neoprene, Nitrile Rubber, Polyethylene/Ethylene
Vinyl Alcohol. The following protective clothing material(s) are recommended: Apron - Neoprene.
8.2.3 Respiratory Protection
Avoid breathing of dust created by cutting, sanding, grinding or machining.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half mask R95 particulate respirator, Half mask or full facepiece air-purifying respirator with N100 particulate
filters, Half facepiece or fullface air-purifying respirator with P100 particulate filters, Half facepiece or fullface air-purifying
respirator with P95 particulate filters, Half facepiece or fullface air-purifying respirator with N95 particulate filters. Consult the
current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not ingest. Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Wash hands
after handling and before eating.
8.3 EXPOSURE GUIDELINES
None Established
_________________________________________________________________________________________________
MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-190, Translucent (Part B)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Specific Physical Form:
Odor, Color, Grade:
General Physical Form:
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL
Boiling point
Density
Vapor Density
Vapor Pressure
Specific Gravity
pH
Melting point
Solubility in Water
Evaporation rate
Volatile Organic Compounds
VOC Less H2O & Exempt Solvents
Viscosity
WATER=1]
Viscous Liquid
Clear, slight epoxy odor
Liquid
No Data Available
>=200 ºF [Test Method: Pensky-Martens Closed Cup]
No Data Available
No Data Available
>=210 ºF
1.17 g/ml [@ 20 ºC]
No Data Available
<=27 psia [@ 131.0000000000 ºF] [Details: MITS data]
Approximately 1.17 Units not avail. or not appl. [Ref Std:
Not Applicable
Not Applicable
Nil
Negligible
0.09 % weight [Test Method: tested per EPA method 24]
No Data Available
2000 - 8000 centipoise [@ 20 ºC] [Test Method: Brookfield]
Page 4 of 7