LMPCC000 Red Lion Controls, LMPCC000 Datasheet - Page 2

• Manufacturer Part Number: LMPCC000
• Description: Switch, Sensor; 9 to 17 VDC; 40 mA (Output); Magnetic; OC; 22 AWG; 3/4 in.
• Manufacturer: Red Lion Controls
• Type: Hall Effectr

Specifications of LMPCC000

• Body Style: Cylindrical
• Current, Rating: 40 mA (Output)
• Current, Switching: 40 mA
• Diameter: 3⁄4 in.
• Function: Speed
• Length: 10.25 in.
• Mounting Type: Flush
• Output: NPN
• Primary Type: Speed
• Technology: Hall Effect
• Temperature, Operating: -18 to +60 °C
• Termination: 3-Wire Connector
• Voltage, Supply: 17 VDC
• Voltage, Switching: 30 VDC
• Wire Size: 22 AWG
• Lead Free Status / Rohs Status: RoHS Compliant part

(LMPCC & LMPEC)
jacketed, 3-wire 22 AWG conductors with stranded shield and 100% foil shield
coverage for noise immunity and is oil and water resistant. Connector/cable
junctions are silicone sealed. The 5/8"-24 threaded ring is fitted with an O-ring to
make a moisture proof connection. Cable is available in 10, 25, or 50 foot lengths.
This cable and connector assembly (see diagram below) is composed of PVC
Dimensions in inches (mm)
100% foil shield coverage. There is no connection of stranded shield wire
to 3-pin connector. Shield may be connected to instrument common for
increased noise immunity.
PVC jacketed, 3-wire, 22 AWG conductors with stranded shield and
3-PIN CONNECTOR EXTENSION CABLE
ORDERING INFORMATION
MODEL NO.
*LMPEC
LMPCC
LMPC
CCA3
DESCRIPTION
Logic Magnetic Pickup, NPN O.C., 10 ft. Cable
Logic Magnetic Pickup, NPN O.C., 25 ft. Cable
Logic Magnetic Pickup, NPN O.C., 50 ft. Cable
Logic Magnetic Pickup, NPN O.C., 3-Pin Connector
Logic Magnetic Pickup, Emitter Follower, 3-Pin Connector
Block Mount for 3/4" Cylindrical Sensors
Steel Plug Mount
Stainless Steel Plug Mount
3-Pin Connector Extension Cable, 10 ft.
3-Pin Connector Extension Cable, 25 ft.
3-Pin Connector Extension Cable, 50 ft.
pickups may be easily mounted using Model 5400100 BLOCK MOUNT (see
diagram below). This machined block of solid aluminum provides for rigid
mounting using the two included #8-32 x 1/2" screws. The one screw split-
clamp design allows for easy adjustment of airgap and locks the unit securely
without deforming the case.
sensors to be mounted in “thru-wall” applications. The Plug Mounts 3/4-14
NPT thread is installed into a threaded wall or casing. The sensor is then
installed through the plug mount. The sensor-to-target airgap is adjusted and the
sensor is tightened into position by two #8-32 set screws. Tightening the ferrule
nut compresses a teflon ferrule around the sensor providing an oil tight seal.
Plug Mounts are available in both steel and stainless steel (see ordering
information).
Logic Magnetic Pickups and other Red Lion Controls 3/4" dia. cylindrical
The PLUG MOUNT (see diagram below) allows 3/4" dia. cylindrical
BLOCK MOUNT
For 3/4" cylindrical sensors
Qty. 2 #8-32 x 1/2
P/N 5400100
included
"
Mounting screws
PART NUMBER
LMPCC000
LMPEC000
CCA3PC00
CCA3PC25
CCA3PC50
LMPC0000
LMPC0025
LMPC0050
5400100
5403701
5403702
PLUG MOUNT
For 3/4" cylindrical sensors
P/N 5403701 - steel
P/N 5403702 - stainless steel