TEP 75-2415WI-CMF TRACOPOWER, TEP 75-2415WI-CMF Datasheet - Page 2

• Manufacturer Part Number: TEP 75-2415WI-CMF
• Description: DC/DC CONVERTER; CHASSIS MOUNT; 75 WATT; INPUT 9-36VDC; 24VDC; 3.2A
• Manufacturer: TRACOPOWER
• Type: Industrialr

Specifications of TEP 75-2415WI-CMF

• Brand/series: TEP 75WI Series
• Configuration: Enclosed
• Mounting Type: Panel
• Number Of Outputs: 1
• Operation: Switching
• Output: 24 V @ 3.2 A
• Primary Type: DC-DC
• Special Features: Ultra wide 4:1 Input voltage range; Reverse input voltage protection; Input protection filter
• Voltage, Input: 9-36 VDC
• Voltage, Output: 24 VDC
• Ultra Wide 4: 1 Input Voltage Range
• Lead Free Status / Rohs Status: RoHS Compliant part

http://www.tracopower.com
Input Specifications
Input current at no load
Input current at full load
Start-up voltage / under voltage shut down
Surge voltage (100 msec. max.)
Conducted noise
ESD (electrostatic discharge)
Radiated immunity
Fast transient / Surge
Conducted immunity
Reverse voltage protection
Recommended input fuse (slow blow)
Output Specifications
Voltage set accuracy
Output voltage adjustment
Regulation
Temperature coefficient
Minimum load
Remote sense
Ripple and noise (20 MHz Bandwidth)
Start up time (nominal Vin and constant resistive load)
Transient response (25 % load step change)
Output current limitation
Over voltage protection
Short circuit protection
Note 1: For operation at low input voltage an input capacitor 4.7µF/50V X7R MLCC or 68µF/100V, 110mOhm Nippon chemi-con
KY series is recommended for a reliable supply of the pulse current. Capacitor is already include with chassis mount option –CM and
–CFM
– Input variation Vin min. to Vin max.
– Load variation (0 – 100 %)
24 Vin; 24 – 48 VDC models: 85 mA typ.
48 Vin; 24 – 48 VDC models: 50 mA typ.
24 Vin; 5 – 15 VDC models: 185 mA typ.
48 Vin; 5 – 15 VDC models: 90 mA typ.
24 & 28 VDC models: 200 mVpk-pk max.
24 – 48 VDC models: 0.3 % max.
12 & 15 VDC models: 100 mVpk-pk max.
5 – 15 VDC models: 0.3 % max.
48 VDC models: 300 mVpk-pk max.
5 VDC models: 75 mVpk-pk max.
24 Vin models: 3600 mA typ. (see Note 1)
48 Vin models: 1800 mA typ.
24 Vin models: 8.5 VDC / 7.5 VDC typ.
48 Vin models: 17.5 VDC / 16 VDC typ.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
24 Vin models: 10 A
48 Vin models: 5 A
EN 55022 level A, FCC part 15, level A
(chassis mount option –CFM required)
EN 61000-4-2, air ±8 kV, contact ±6 kV,
perf. criteria A
EN 61000-4-3, 10 V/m, perf. criteria A
EN 61000-4-4, ±2 kV, perf. criteria A
EN 61000-4-5, ±1 kV perf. criteria A
With external input capacitor e.g. Nippon
chemi-con KY 200 µF, 100 V, ESR 48 mOhm
or with chassis mount option –CFM
EN 61000-4-6, 10 Vrms, perf. criteria A
parallel diode
±1 %
+10 % / –20 % by external resistor
see application note:
www.tracopower.com/products/tep75wi-application.pdf
0.2 % max.
±0.02 %/K
not required
10 % max. of Vout nom.
(tim up value to subtract)
25 ms typ. (at power On or remote On)
200 µs typ.
at 110 – 140 % of Iout max.
at 115 – 130 % of Vout nom.
indefinite, automatic recovery.
DC/DC Converters
TEP 75WI Series
Page 2 of 6
75 Watt