329S-.47-10-1200 ASC Capacitors, 329S-.47-10-1200 Datasheet - Page 5

• Manufacturer Part Number: 329S-.47-10-1200
• Description: CAPACITOR, POLYPROPYLENE, .47MFD, 10% TOLERANCE, 1200 VOLT
• Manufacturer: ASC Capacitors

Specifications of 329S-.47-10-1200

• Capacitance: 0.47 μF
• Dissipation Factor: 0.1% (Min.) @ 1000 Hz +⁄-20 Hz, 25°C +⁄-5°C
• Insulation Resistance: 100000 Megohms (Max.) after 2 Minutes @ 100 VDC, 25°C +⁄-5°C
• Lead Pitch: 0.965 in. +⁄-0.039
• Length: 1.650 in. (Max.)
• Length, Lead: 0.6 in. (Typ.)
• Material, Element: Polypropylene Film
• Temperature, Operating, Maximum: 105 °C
• Temperature, Operating, Minimum: -55 °C
• Termination: IGBT Mountable
• Thickness: 0.900 in. (Max.)
• Tolerance: ±10 %
• Voltage, Rating: 1200 VDC
• 329s: 0.1–2.5 MFD
• X329s: 0.1–10 MFD
• Voltages: 600, 1200, 2000 VDC
• Lead Free Status / Rohs Status: RoHS Compliant part

PHYSICAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
ADDITIONAL INFORMATION
Phone: [phone]
Fax: [phone]
CONSTRUCTION: NON-INDUCTIVE WOUND METALLIZED POLYPROPYLENE FILM AND FOIL HYBRID.
CASE: FLAME RETARDANT TAPE WRAP CASE AND EPOXY FILL.
LEAD MATERIAL: 0.025" (0.6mm) THICK SOLDER COATED OR TINNED BRASS IGBT MOUNT STYLE LUGS
AVAILABLE IN EITHER "STEP" (S) OR "FLAT" (F) CONFIGURATIONS.
DIMENSIONS: AS SPECIFIED IN TABLES.
CAPACITANCE: AS SPECIFIED IN TABLES ± REQUESTED TOL ERANCE WHEN MEASURED AT OR REFERRED
TO 1000 ± 20 Hz AND 25 ± 5 °C.
TOLERANCE: ±1%, ±2%, ±5%, ±10%, AND ±20% AVAILABLE. OTHER TOLERANCES AVAILABLE UPON
REQUEST.
DISSIPATION FACTOR: SHALL NOT BE GREATER THAN 0.1% WHEN MEASURED AT OR REFERRED TO
1000 ± 20 Hz AND 25 ± 5 °C.
INSULATION RESISTANCE: SHALL BE GREATER THAN 100,000 M x µF WHEN MEASURED AFTER 2 MINUTES
ELECTRIFICATION AT 100VDC AND 25 ± 5 °C.
DIELECTRIC STRENGTH: 150% RATED VOLTAGE FOR 1 MINUTE THROUGH A LIMITING RESISTANCE OF
100 OHMS/VOLT AT 25 ± 5 °C.
RATED VOLTAGE: 600VDC/250VAC/800V
AVAILABLE. AC VOLTAGE RATINGS ARE FOR 60 Hz OPERATION - VOLTAGE MUST BE DERATED FOR HIGHER
FREQUENCIES BASED ON A CONSTANT VOLT-AMPERE. PEAK VOLTAGE RATINGS ARE VALID FOR NON-
RECURRING SURGE VOLTAGES - RECURRING SURGE VOLTAGE RATING IS SAME AS DC RATED VOLTAGE.
TEMPERATURE: -55 °C TO +105 °C AT FULL RATED CURRENT AND VOLTAGE.
RATED CURRENT: PEAK CURRENT RATINGS AS SPECIFIED IN TABLES. RMS CURRENT RATINGS AS
SPECIFIED IN CHART.
ESR (EQUIVALENT SERIES RESISTANCE): TYPICAL ESR AS SPECIFIED IN TABLES. MAXIMUM ESR LIMIT IS 2
X TYPICAL ESR VALUE.
ESL (EQUIVALENT SERIES INDUCTANCE): TYPICAL ESL MEASURES FROM 18nH TO 22 nH.
ORDERING INFORMATION: ALL ASC CAPACITORS ARE ORDERED BY "FAMILY CAP-TOL-VOLT"
DESIGNATION. ADD "S" OR "F" SUFFIX TO FAMILY TO INDICATE "STEP" OR "FLAT" TERMINALS
RESPECTIVELY. (I.E. TO ORDER A 329, STEP TERMINAL, 1.0µF, ±10%, 600VDC CAPACITOR, REQUEST PART
NUMBER "329S 1-10-600")
SEE ALSO: "GENERAL INFORMATION - POLYPROPYLENE CAPACITORS" DOCUMENT FOR ADDITIONAL
PHYSICAL, ELECTRICAL, AND PERFORMANCE CHARACTERISTICS NOT MENTIONED IN THIS FILE.
WARNING: INFORMATION ON THIS FILE IS SUBJECT TO CHANGE WITHOUT NOTICE AT ASC'S DISCRETION.
METALLIZED POLYPROPYLENE/FOIL HYBRID
TAPE WRAP AND EPOXY FILL CASE
301 WEST O STREET
GENERAL SPECIFICATIONS
PEAK
, 1200VDC/500VAC/1600V
OGALLALA, NE 69153
PEAK
e-mail: [e-mail]
, AND 2000VDC/500VAC/2600V
web: www.ascapacitor.com
PAGE 5 OF 5
LAST MODIFIED: 08/09/01
329
PEAK