10074C Agilent Technologies Test Equipment, 10074C Datasheet - Page 12

• Manufacturer Part Number: 10074C
• Description: Probe; 1.5 m; 150 MHz; 10 Megohms; Approx 15 pF; lt 2.33 ns; 10:1
• Manufacturer: Agilent Technologies Test Equipment

Specifications of 10074C

• Attenuation: 10:1
• Bandwidth: 150 MHz
• Capacitance, Input: Approx 15 pF
• Length, Cable: 1.5 m
• Resistance, Input: 10 Megohms

• Up to 100 MHz bandwidth and
• Hybrid technology to measure
• Compatible with any 1 MΩ
Accurate current measurements
without breaking the circuit
Compatible with any scope or
voltage measuring instruments
with BNC input, the 1146A and
N2780A Series current probes
offer accurate and reliable solu-
tions for measuring dc and ac
currents. The probes use a hybrid
technology that includes a Hall
effect sensor, which senses the
dc current and a current trans-
former, which senses the ac cur-
rent, making it unnecessary to
make an electrical connection to
the circuit.
1146A 100 kHz current probe
The 1146A ac/dc current probe
provides accurate display and
measurement of currents from
100 mA to 100 Arms, dc to
100-kHz, without breaking into
the circuit. A battery level indi-
cator and overload indicator
help ensure proper readings. It
connects directly to the scope
through a 2 m coaxial cable with
an insulated BNC.
1146A 100 kHz current probe
Current Probes
12
500 Arms current
ac and dc
scope input
1147A 50-MHz Current Probe with
AutoProbe Interface
The 1147A is a wide bandwidth,
dc to 50-MHz current probe.
The probe offers flat frequency
response across the entire dc to
50-MHz bandwidth, low noise
(<-2.5-mArms) and low circuit
insertion loss. The 1147A probe
is compatible with the AutoProbe
interface, which completely
configures the oscilloscope for
the probe when used with the
5000/7000 Series and 300-MHz
- 1-GHz 6000 Series scope. Probe
power is provided by the scope,
so there is no need for an external
power supply.
N2780A/81A/82A/83A 2-MHz/
10-MHz/50 MHz/100 MHz current
probe
The N2780A Series current
probes are high bandwidth,
active current probes, featur-
ing flat bandwidth, low noise
(<-2.5-mArms) and low circuit
N2780A Series current probes with N2779A power supply
1147A 50-MHz current probe with
AutoProbe interface
insertion loss. In conjunction
with the power supply (model
N2779A), this probe can be used
with any oscilloscope having a
high-impedance BNC input. The
companion power supply N2779A
(3x 12 Vdc output) lets you con-
nect three N2779As to a single
power supply.