9211 Pico, 9211 Datasheet - Page 2

• Manufacturer Part Number: 9211
• Description: Sampling Oscilloscope; PC-Based, USB/LAN; 12 GHz, 2 Channels
• Manufacturer: Pico
• Type: PC-Basedr

Specifications of 9211

• Bandwidth: 12000 MHz
• Configuration: Handheld
• Number Of Channels: 2
• Sample Rate: 5000 GS/s

12 GHz bandwidth
Pulse parameter measurements
The wide bandwidth specification provides acquisition and
measurement of fast signals with a rise time of 50 ps or
faster. Timebase stability, accuracy, and resolution of 200
fs allow characterisation of jitter in the most demanding
applications.
The PicoScope 9000 scopes quickly measure more
than 40 pulse parameters. Up to ten simultaneous
measurements or four statistics measurements are
supported. No need to count graticules and estimate the
waveform’s position. The measurements conform to the
IEEE standards.
10 GHz prescaled trigger
1 GHz full-function direct trigger
Built-in 2.7 Gb/s clock recovery
Kit contents
The PicoScope 9000 Series has a built-in high-frequency trigger.
The bandwidth of up to 10 GHz allows measurements of
microwave components with extremely fast data rates.
The PicoScope 9000 Series is equipped with built-in direct
trigger for signals up to 1 GHz repetition rate without
using additional trigger units.
The PicoScope 9211 has built-in clock recovery for serial
data up to 2.7 Gb/s.
• PicoScope 9201 or 9211 Sampling PC Oscilloscope
• PicoScope 9000 Series Software CD
• Installation guide
• Two SMA M-F adapters/connector savers
• USB cable
• LAN cable (9211 only)
• Power supply - UK, US, EU or AUS/NZ
• Carry case